3. Adjusting the Fan Speed. TECHNIBEL MPAF240R5IAA, MPAF180R5IAA

NOTE

Operation with the Remote Control Unit (continued)

• Choose the best position in the room for the remote control unit, which also acts as the sensor for room comfort and transmits the operating instructions. Once you’ve found this best position, always keep the remote control unit there.

• This appliance has a built-in 5-minute time delay circuit to ensure reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop.

3. Adjusting the Fan Speed

A. Automatic fan speed Simply set the FAN SPEED selector button to the position.

This automatically sets the best fan speed for the room temperature.

B. Manual fan speed If you want to adjust fan speed manually during operation, just set the FAN

SPEED selector button as desired. [ , , or ]

4. Fan Only

STEP 2

STEP1

STEP 3

If you want to circulate air without any temperature control, follow these steps:

STEP 1

STEP 2

Press the MODE selector button to switch to the fan mode

.

Press the ON/OFF operation button.

STEP 3 Press the FAN SPEED selector button to select the fan speed of your choice ( , or ).

NOTE There is no FAN only function at M of the S/M switch on the remote control unit.

14