Information labels on the machine. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Information labels on the machine. Krone BA EasyCut F 360 M gez. | Manualzz

Safety

Information labels on the machine

9.

Ord. no. 27 021 592 0 (1x)

Danger if the regulating valves of the tractor are not locked

There is a risk of accidents if the regulating valves of the tractor are not locked.

„ To prevent functions from being triggered accidentally, the regulating valves of the tractor must be in neutral position and locked during road transport journeys.

2

2.7

2.7

Information labels on the machine

Each information label has an order number. You can order the labels directly from your

KRONE dealer. Replace missing, damaged and illegible information labels immediately.

Prior to attaching an information label, ensure that the contact surface on the machine is clean and free of dirt, oil and grease so that the label can adhere to properly.

EasyCut F 360 M

Original operating instructions 150000792_04_en 33

2

2.7

Safety

Information labels on the machine

Location and meaning of the information labels

For the “pushed” version

1

Ø17mm min. 14 mm

255 498 1

2 3

5

4

KM001-041

34

EasyCut F 360 M

Original operating instructions 150000792_04_en

Safety

Information labels on the machine

1.

Ord. no. 255 498 1 (1x)

Ø17mm

For "Blade screw connection" version

Check the material thickness of the retaining bolts after each blade change and after each contact with foreign objects. The retaining bolts must be replaced by authorized experts when the material thickness at the weakest point is below 14 mm,

see Page 126 .

min. 14 mm

255 498 1

2.

Ord. no. 255 499 2 (1x)

Ø17mm min.14mm

3.

Ord. no. 27 025 446 0 (1x)

For "Blade quick fastener" version

Check the material thickness of the retaining bolts after each blade change and after each contact with foreign objects. The retaining bolts must be replaced by authorized experts when the material thickness at the weakest point is below 14 mm,

see Page 126 .

This label specifies the order numbers for spare blades.

2

2.7

20237273

20237274

20237273 20237274

4.

Ord. no. 939 278 4 (1x)

DE

EN

ES

FR

IT

NL

RU

Vor der Erstinbetriebnahme und 1x jährlich vor der Ernte muss die Reibkupplung gelüftet werden

The friction clutch must be bled at the first operation and once a year before the harvesting season.

El embrague de seguridad debe someterse a una purga antes de la primera puesta en marcha y una vez al año antes de iniciarse la campaña de trabajo.

La sécurité à friction doit faire l'objet d'une purge lors de la première mise en route et une fois par an avant le début de la saison.

La frizione di sicurezza deve essere sottomessa ad uno spurgo alla prima messa in campo come pure una volta all'anno prima della campagna.

Voor de eerste inbedrijfstelling en eenmaal per jaar voor de oogst moet de frictiekoppeling worden belucht.

Перед первым вводом в эксплуатацию и 1 раз в год перед уборкой урожая необходимо растормозить фрикционную муфту.

939 278 4

5.

Ord. no. 939 161 3 (1x)

DE

EN

ES

FR

IT

NL

RU

Mähwerk bei Rückwärtsfahrt ausheben.

Lift mower prior to reversing.

Levantar la guadanadora antes de retroceder.

Relever la faucheuse avant de reculer.

Sollevare la falciatrice prima di retrocedere.

Til de maaiwerk op tijdens het achteruitrijden.

Поднимать косилку при реверсе.

939 161 3

• Order no. 942 012 2

This label states that the friction clutch must be bled before the initial start-up and once a year before the season.

This label tells you that the mower must be raised during reverse movement.

The lifting points on the machine are marked with this label,

see Page 88 .

942 012 2

• Ord. no. 27 021 260 0

EasyCut F 360 M

Original operating instructions 150000792_04_en 35

2

2.7

Safety

Information labels on the machine

27 021 260 0

There are several lubrication points on the machine which must be lubricated at regular intervals,

see Page 122

. Lubrication points that are not directly visible are additionally marked with this information label.

36

EasyCut F 360 M

Original operating instructions 150000792_04_en

Safety

Information labels on the machine

2

2.7

EasyCut F 360 M

Original operating instructions 150000792_04_en 37

2

2.7

Safety

Information labels on the machine

For the “trailed” version

1

Ø17mm min. 14 mm

255 498 1

2 3

5

4

KM001-042

38

EasyCut F 360 M

Original operating instructions 150000792_04_en

Safety

Information labels on the machine

1.

Ord. no. 255 498 1 (1x)

Ø17mm

For "Blade screw connection" version

Check the material thickness of the retaining bolts after each blade change and after each contact with foreign objects. The retaining bolts must be replaced by authorized experts when the material thickness at the weakest point is below 14 mm,

see Page 126 .

min. 14 mm

255 498 1

2.

Ord. no. 255 499 2 (1x)

Ø17mm min.14mm

3.

Ord. no. 27 025 446 0 (1x)

For "Blade quick fastener" version

Check the material thickness of the retaining bolts after each blade change and after each contact with foreign objects. The retaining bolts must be replaced by authorized experts when the material thickness at the weakest point is below 14 mm,

see Page 126 .

This label specifies the order numbers for spare blades.

2

2.7

20237273

20237274

20237273 20237274

4.

Ord. no. 939 278 4 (1x)

DE

EN

ES

FR

IT

NL

RU

Vor der Erstinbetriebnahme und 1x jährlich vor der Ernte muss die Reibkupplung gelüftet werden

The friction clutch must be bled at the first operation and once a year before the harvesting season.

El embrague de seguridad debe someterse a una purga antes de la primera puesta en marcha y una vez al año antes de iniciarse la campaña de trabajo.

La sécurité à friction doit faire l'objet d'une purge lors de la première mise en route et une fois par an avant le début de la saison.

La frizione di sicurezza deve essere sottomessa ad uno spurgo alla prima messa in campo come pure una volta all'anno prima della campagna.

Voor de eerste inbedrijfstelling en eenmaal per jaar voor de oogst moet de frictiekoppeling worden belucht.

Перед первым вводом в эксплуатацию и 1 раз в год перед уборкой урожая необходимо растормозить фрикционную муфту.

939 278 4

5.

Ord. no. 939 161 3 (1x)

DE

EN

ES

FR

IT

NL

RU

Mähwerk bei Rückwärtsfahrt ausheben.

Lift mower prior to reversing.

Levantar la guadanadora antes de retroceder.

Relever la faucheuse avant de reculer.

Sollevare la falciatrice prima di retrocedere.

Til de maaiwerk op tijdens het achteruitrijden.

Поднимать косилку при реверсе.

939 161 3

• Order no. 942 012 2

This label states that the friction clutch must be bled before the initial start-up and once a year before the season.

This label tells you that the mower must be raised during reverse movement.

The lifting points on the machine are marked with this label,

see Page 88 .

942 012 2

• Ord. no. 27 021 260 0

EasyCut F 360 M

Original operating instructions 150000792_04_en 39

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents