Overload protections on the machine. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Overload protections on the machine. Krone BA EasyCut F 360 M gez. | Manualzz

3.2

3.3

Machine Description

Overload protections on the machine

Overload protections on the machine

NOTICE

Machine damage due to load peaks

The overload protections protect the tractor and the machine from load peaks. For this reason, overload protections must not be modified. The warranty for the machine becomes void if other than the factory-specified overload protections are used.

„ Only use the overload protections installed in the machine.

„ To avoid early wear of the overload protection, switch the PTO shaft off if the overload protection responds for a longer period of time.

„

„Shut down and safeguard the machine, see Page 24

.

„ Remedy the malfunction,

see Page 123

.

3

3.2

Universal shaft

As overload protection, the universal shaft is equipped with a friction clutch.

To vent the friction clutches, see see Page 104 .

Labelling

INFO

The entire identification plate represents a legal document and should not be altered or rendered illegible!

I II

1 1

KMG000-021

The machine data is located on the type plate (1). The type plate sits on the side of the frame.

Information for enquiries and orders

Example image

For inquiries about the machine and for ordering spare parts, please specify series (1), vehicle identification number (5) and year of manufacture (4) of the specific machine. To ensure that the data is always available, KRONE recommends that you enter it in the boxes on the front cover of these operating instructions.

3.4

Intermediate universal shaft

To ensure the functionality and to increase the lifetime, the friction clutch must be vented once a year before the beginning of the season,

see Page 104

.

EasyCut F 360 M

Original operating instructions 150000792_04_en 45

3

3.4

Machine Description

Intermediate universal shaft

1 2 1 2

KMG000-014

The intermediate universal shaft (1) for the mower drive is connected with the friction clutch (2) towards the input gearbox. The friction clutch protects the tractor and the machine from damage.

46

EasyCut F 360 M

Original operating instructions 150000792_04_en

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents