Adapting coupling points. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Adapting coupling points. Krone BA EasyCut F 360 M gez. | Manualzz

6

6.4

Commissioning

Adapting coupling points

I

1 1

II

1 1

6.4

KMG000-054

Mount the lighting system (1) according to the instructions for accessories kit (document number

150 001 118).

Adapting coupling points

Adapting the lower link pins

For the “pushed” version

Kat.II

Kat.II

1 2

Kat.III

3

KMG000-095

2

Lower link pins

The three-point linkage is designed for category II and III.

5

4

2

Kat.III

1

2 3

52

EasyCut F 360 M

Original operating instructions 150000792_04_en

Commissioning

Adapting coupling points

Conversion to category II

„ Pull out the lower link pins (2).

„ Insert the lower link pins (2) through the ball sleeve cat. II (1).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The shorter journal of the lower link pin (2) faces inwards.

6

6.4

Conversion to category III

„ Pull out the lower link pins (2).

„ Turn the lower link pins (2) by 180° and insert them through the ball sleeves cat. III (3).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The longer journal of the lower link pin (2) faces inwards.

Top link pin

The top link pin (1) is designed for category II and III.

Kat.II

2

Kat.III

2

1 4

I

II

III

1 3

KMG000-096

Category II (Cat. II)

„ Loosen the linch pin (3) and pull out the top link pin (1).

„ Insert the top link bolt (1) in position (I), (II) or (III) and through the ball sleeve cat. II (2).

The thicker journal of the top link pin (1) faces outwards.

„ Secure the top link bolt (1) using the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

EasyCut F 360 M

Original operating instructions 150000792_04_en 53

6

6.4

Commissioning

Adapting coupling points

Category III (Cat. III)

„ Loosen the linch pin (3) and pull out the top link pin (1).

„ Insert the top link bolt (1) in position (I), (II) or (III) and through the ball sleeve cat. III (2).

The thinner journal of the top link pin (1) faces outwards.

„ Secure the top link bolt using the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

For the “trailed” version

Kat.II

Kat.II

54

1 2 2 1

Kat.III

Kat.III

5

4

3

KMG000-081

2 2 3

Lower link pins

The three-point linkage is designed for category II and III.

Conversion to category II

„ Pull out the lower link pins (2).

„ Insert the lower link pins (2) through the ball sleeve cat. II (1).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The shorter journal of the lower link pin (2) faces inwards.

Conversion to category III

„ Pull out the lower link pins (2).

„ Turn the lower link pins (2) by 180° and insert them through the ball sleeves cat. III (3).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The longer journal of the lower link pin (2) faces inwards.

Top link pin

The top link pin (1) is designed for category II and III.

EasyCut F 360 M

Original operating instructions 150000792_04_en

Kat.II

2

Commissioning

Adapting coupling points

6

6.4

Kat.III

2

1 3

1 4

I

II

KM000-351

Category II (cat. II)

„ Loosen the linch pin (3) and pull out the top link pin (1).

„ Insert the top link pin (1) in the position (I) or (II) and through the ball sleeve cat. II (2).

The thicker journal of the top link pin (1) is facing outwards.

„ Secure the top link pin with the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

Category III (cat. III)

„ Insert the top link pin (1) in the position (I) or (II) and through the ball sleeve cat. III (2).

The thinner journal of the top link pin (1) is facing outwards.

„ Secure the top link pin with the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

EasyCut F 360 M

Original operating instructions 150000792_04_en 55

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents