Mounting top link fork. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Mounting top link fork. Krone BA EasyCut F 360 M gez. | Manualzz

7.3

Start-up

Mounting top link fork

For the “trailed” version

„ Check distance (A) and distance (+B/-B).

ð Distance (A)=785 mm

ð Distance (+B) (visible lower link point)=20 mm

„ Change the front lifting unit over to single-acting.

„ Disconnect the lower links from the swing position.

„ Move the front axle suspension of the tractor to the central position and deactivate it.

7

7.3

Mounting top link fork

For the “pushed” version

WARNING

Danger to life caused by an incorrectly mounted top link fork

If a top link fork (1) has been mounted incorrectly, the threaded spindle may break and the machine may disconnect unintentionally. This may result in serious accidents.

„ When mounting the top link fork, make sure that the rounded side (4) of the top link fork is facing upwards and the fork (3) below the straight side is attached to the top link fork.

2 4

3

1

3

KMG000-062

INFO

The top link fork (1) can be ordered with the order number 20 038 088 0.

„ Screw the top link fork (1) into the top link (2) M30 x 3.5.

Alternatively, it is also possible to use a telescopic top link instead of a top link.

„ Fit the forks (3) below the straight side onto the top link fork.

„ Mount the top link fork with the rounded side (4) facing upwards on the tractor side.

„ Perform a visual inspection to check that the forks (3) are pointing downwards and the rounded off side (4) of the top link fork is pointing upwards.

EasyCut F 360 M

Original operating instructions 150000792_04_en 61

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents