Preparing the machine for shipment. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Preparing the machine for shipment. Krone BA EasyCut F 360 M gez. | Manualzz

9

9.3

Driving and Transport

Preparing the machine for shipment

For the “trailed” version

2

3

9.3

9.3.1

1

6 5 4

6 2

KMG000-083

„

Shut down and safeguard the machine, see Page 24

.

„ Use the tractor hydraulics to lower the machine onto the ground.

„

Shut down and safeguard the machine, see Page 24

.

„ For version with "Hydraulically folding side guards" : De-pressurise the tractor hydraulics.

„ Remove the supporting chain (4) of the universal shaft on the tractor side.

„ Remove the universal shaft (5) on the tractor side and lay it down on the universal shaft bracket (6).

„ For version with "Road travel lighting": Pull the 7-pin plug of the connection cable out of the 7-pin socket of the tractor and place it on the machine.

„ Uncouple the hydraulic hose/the hydraulic hoses (2) from the tractor, attach the dust cap/s and place them on the machine.

„ Detach the top link (3).

„ Unlock the lower link hooks on the tractor.

„ Continue to lower the front linkage until the lower link pins are free.

„ Carefully drive away by reversing the tractor.

Preparing the machine for shipment

Lifting the machine

WARNING

Risk of injury due to raised machine

There is a risk to individuals from the machine falling and parts which are swinging in an uncontrolled manner.

„ Use only permitted hoists and slings with a sufficient load-bearing capacity. For the weights

see Page 47 .

„ Note the information on the suspension points provided.

„ Make sure the lifting means are properly secured.

„ Never stay under the suspended machine.

„

If work has to be performed under the machine, securely support the machine, see

Page 24 .

88

EasyCut F 360 M

Original operating instructions 150000792_04_en

Driving and Transport

Preparing the machine for shipment

The machine is equipped with 3 suspension points:

• The suspension points (1) and (2) are at the front and at the rear on the outrigger arm.

9

9.3

For the “pushed” version

1

942 012 1

KMG000-122

The machine is equipped with 1 suspension point:

• The suspension point (1) is on the headstock.

EasyCut F 360 M

Original operating instructions 150000792_04_en 89

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents