Increasing/reducing the ground pressure – hydraulic relief adjustment. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Increasing/reducing the ground pressure – hydraulic relief adjustment. Krone BA EasyCut F 360 M gez. | Manualzz

10.4

Settings 10

Increasing/reducing the ground pressure – hydraulic relief adjustment 10.4

Increase dimension X = reduced mower relief = higher ground pressure

ü The machine is in the transport position.

ü

The machine is shut down and safeguarded, see Page 24

.

„ Dismount the supporting chain (2) from the turnbuckle (1).

„ To reduce the ground pressure, reduce the dimension X.

„ To increase the ground pressure, increase the dimension X.

„ Mount the supporting chain (2) on the turnbuckle (1).

„ The supporting chains (2) must be attached identically on both sides.

Increasing/reducing the ground pressure – hydraulic relief adjustment

For the “trailed” version

III I

1

KMG000-043

The hydraulic cylinder adjusts the ground pressure of the cutterbar to the local conditions. To protect the sward, the cutterbar must be relieved to such an extent that it does not jump when mowing or leave any traces of abrasion on the ground.

ü The hydraulic hose (1+) is connected to a single-acting control unit.

„ Move the stop cock (1) into position (I),

see Page 80 .

„ Actuate the control unit (1+) until the mower is lowered to working position.

„ Move the stop cock (1) into position (III),

see Page 80

.

„ Actuate the control unit (1+) until the desired relief pressure is displayed on the pressure gauge (2).

Æ The higher the relief pressure, the lower the ground pressure.

Æ The lower the relief pressure, the higher the ground pressure.

EasyCut F 360 M

Original operating instructions 150000792_04_en 95

10 Settings

10.4

Increasing/reducing the ground pressure – hydraulic relief adjustment

2

KMG000-116

The relief pressure can be read off on the pressure gauge (2). Set the ground pressure according to the ground conditions.

Recommended relief pressure: 80...100 bar .

II

1

KM000-990

„ Set the stop cock (1) to position (III) when the desired relief pressure is reached.

96

EasyCut F 360 M

Original operating instructions 150000792_04_en

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents