Maintenance - Gearbox. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Maintenance - Gearbox. Krone BA EasyCut F 360 M gez. | Manualzz

13 Maintenance - Gearbox

13.1

Overview of gearboxes

13 Maintenance - Gearbox

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, see

Page 13 .

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„ The safety routines must be read and observed to avoid accidents,

see Page 24 .

13.1

Overview of gearboxes

1 2 1 2

13.2

KMG000-105

1 Main gearbox

Input gearbox

2 Input gearbox

110

KMG000-005

„ Comply with the safety routine "Safe execution of oil level check, oil and filter element exchange",

see Page 25 .

EasyCut F 360 M

Original operating instructions 150000792_04_en

Maintenance - Gearbox 13

Input gearbox 13.2

INFO

The oil level must be checked and the oil must be changed in working position and with machine in horizontal position.

„ Loosen the supporting chain(s) (5).

„ Remove the intermediate universal shaft(s) from the input gearbox.

„ Dismount the guard (4).

Checking oil level

„ Remove the locking screw from the inspection hole (1).

ð If the oil reaches the inspection hole (1):

„

Screw the locking screw into the inspection hole (1), tightening torque see Page 103 .

ð If the oil does not reach the inspection hole (1):

„ Remove the locking screw from the filling hole (3).

„ Refill with fresh oil up to the inspection hole (1) via the filling hole (3).

„ Screw the locking screw into the inspection hole (1) and the locking screw into the filling

hole (3), tightening torque see Page 103 .

„ Mount the guard (4).

„ Slide the intermediate universal shaft(s) onto the input gearbox and secure it/them.

„ Secure the universal shaft guard(s) with the supporting chain(s) (5) against turning.

Changing the oil

ü A suitable container is available for escaping oil.

„ Loosen the supporting chain(s) (5).

„ Remove the intermediate universal shaft(s) from the input gearbox.

„ Dismount the guard (4).

„ Unscrew the locking screw of the inspection hole (1) and the locking screw of the filling hole (3).

„ Unscrew the drain plug (2) and drain the oil.

„

Mount the drain plug (2), tightening torque see Page 103 .

„ Top up with fresh oil via the filling hole (3) up to the inspection hole (1).

„ Screw the locking screw into the inspection hole (1) and the locking screw into the filling

hole (3), tightening torque see Page 103 .

„ Mount the guard (4).

„ Slide the intermediate universal shaft(s) onto the input gearbox and secure it/them.

„ Secure the universal shaft guard(s) with the supporting chain(s) (5) against turning.

EasyCut F 360 M

Original operating instructions 150000792_04_en 111

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents