Index. Krone BA EasyCut F 360 M gez.

Add to My manuals
136 Pages

advertisement

Index. Krone BA EasyCut F 360 M gez. | Manualzz

19 Index

19 Index

A

Adapting coupling points .................................... 52

Adapting universal shaft ..................................... 56

Additional equipment and spare parts ................ 14

Adjusting the relief spring(s) ............................... 93

Applicable documents .......................................... 6

Attaching the relief springs with a turnbuckle ..... 65

B

Basic safety instructions ..................................... 13

Basic setting of mower ....................................... 73

Behavior in the case of voltage flashover of

overhead lines .................................................... 21

Behaviour in dangerous situations and in case of

accidents ............................................................ 24

130

EasyCut F 360 M

Original operating instructions 150000792_04_en

Index 19

C

Calculating the ballasting of the tractor-machine

combination ........................................................ 57

Carrying out oil level check and oil and filter

element changes safely...................................... 25

Changing blades for the “blade quick fastener”

version .............................................................. 117

Changing blades for the “blade screw connection”

version .............................................................. 116

Changing the oil ............................................... 111

Check clearance................................................. 62

Check/change blades ....................................... 114

Checking front end dimension ............................ 72

Checking guard cloths ...................................... 107

Checking hydraulic hoses ................................ 109

Checking internal chains for overstretching ....... 66

Checking oil level ............................................. 118

Checking the blade for wear............................. 115

Checking the wear limit on cutting discs/mower

drums ............................................................... 128

Checking/replacing blade carrier ...................... 126

Checking/replacing cutting discs/mower drums 127

Checking/replacing linings on cutterbar ........... 117

Checking/replacing retaining bolts ................... 126

Checking/setting parallel lifting ........................... 63

Checklist for initial operation .............................. 50

Children in danger .............................................. 14

Cleaning the machine....................................... 107

Commissioning ................................................... 50

Configure/check the Camera Monitor System.... 97

Connect the Camera Monitor System ................ 70

Connecting hydraulic hoses ............................... 67

Connecting machine to tractor ........................... 62

Connecting road travel lighting ........................... 68

Connecting the machine..................................... 14

Consumables ............................................... 20, 48

Contact ................................................................. 2

Contact data of your dealer .................................. 2

Control and Display Elements ............................ 49

Conversion table .................................................. 9

Cross references .................................................. 6

D

Damaged hydraulic hoses .................................. 22

Danger associated with welding work ................ 23

Danger resulting from damage to the machine .. 15

Danger when cornering with a hitched machine

and due to the overall width ............................... 19

Danger when driving on road and field............... 19

Danger zone between tractor and machine ....... 17

Danger zone due to trailing machine parts......... 17

Danger zone ejected objects .............................. 17

Danger zone PTO shaft...................................... 17

Danger zone universal shaft............................... 16

Danger zone when drive is switched on ............. 17

Danger zones ..................................................... 16

Dangers arising from environment ..................... 21

Dangers during road travel ................................. 19

Dangers if the machine is not prepared properly for

road travel .......................................................... 19

Dangers in connection with certain activities:

Working on the machine..................................... 22

Dangers when operating the machine on slopes 20

Declaration of conformity.................................. 135

Deviating tightening torques ............................. 104

Directories and references ................................... 6

Driving and Transport ......................................... 85

E

Ensuring functionality of safety devices ............. 18

Environmental protection and disposal .............. 20

EasyCut F 360 M

Original operating instructions 150000792_04_en 131

19 Index

F

Field mode.......................................................... 83

Figures ................................................................. 7

Fire hazard ......................................................... 21

Fold down the front guard .................................. 75

Folding down the side guard - for "Series" version

(working position) ............................................... 77

Folding down the side guard – in version

"hydraulically folding side guards" (working

position) .............................................................. 78

Folding down warning panel (transport position) 78

Folding up the front guard .................................. 74

Folding up the side guard - for "Series" version

(transport position) ............................................. 76

Folding up the side guard – in version

"hydraulically folding side guards" (transport

position) .............................................................. 77

Folding up warning panel (working position) ...... 79

Front guard ......................................................... 74

G

General disturbances ....................................... 123

H

Hot liquids........................................................... 22

Hot surfaces ....................................................... 22

How to use this document .................................... 6

Hydraulic control units of the tractor ................... 49

Hydraulic oil ...................................................... 109

I

Icons in figures ..................................................... 7

Icons in the text .................................................... 7

Importance of operating instructions .................. 13

Increasing/reducing ground pressure via

perforated bars ................................................... 93

Increasing/reducing ground pressure via

supporting chains ............................................... 94

Increasing/reducing ground pressure via

turnbuckles ......................................................... 94

Increasing/reducing the ground pressure –

hydraulic relief adjustment.................................. 95

Information for enquiries and orders .............. 2, 45

Information labels on the machine ..................... 33

Information on direction ........................................ 7

Information on This Document ............................. 6

Input gearbox ................................................... 110

Installing universal shaft ..................................... 71

Intended use....................................................... 12

Intermediate universal shaft ............................... 45

J

Jobs on the machine .......................................... 15

L

Labelling ............................................................. 45

Lashing the machine .......................................... 90

Lifting the machine ............................................. 88

Liquids under high pressure ............................... 22

Location and meaning of the information labels . 34

Locking screws on the gearboxes .................... 103

Locking/releasing stop cock ............................... 80

Lower link pins.............................................. 52, 54

Lowering machine from transport position to

working position.................................................. 81

Lubricate universally-jointed drive shaft ........... 121

Lubricating greases ............................................ 48

Lubricating intermediate universal shaft ........... 121

Lubricating universal shaft................................ 121

Lubrication chart - Machine .............................. 121

132

EasyCut F 360 M

Original operating instructions 150000792_04_en

Index 19

M

Machine Description ........................................... 43

Machine overview............................................... 43

Main gearbox.................................................... 112

Maintenance – After the season....................... 100

Maintenance – Before the season...................... 99

Maintenance - Cutterbar................................... 113

Maintenance - Every 10 hours, but at least once a

day.................................................................... 100

Maintenance - Every 200 hours ....................... 101

Maintenance - Every 50 hours ......................... 101

Maintenance - Gearbox .................................... 110

Maintenance - General Information .................... 99

Maintenance - Hydraulic System...................... 108

Maintenance - Lubrication ................................ 120

Maintenance - Once after 50 hours .................. 100

Maintenance and repair work ............................. 23

Maintenance table .............................................. 99

Malfunction, cause and remedy ....................... 123

Means of representation....................................... 7

Metric thread screws with control thread .......... 101

Metric thread screws with countersunk head and

hexagon socket ................................................ 103

Metric thread screws with fine thread ............... 102

Mounting lighting system .................................... 51

Mounting lower link extension ............................ 63

Mounting relief springs ....................................... 64

Mounting the universal shaft on the machine ..... 51

Mounting top link fork ......................................... 61

Moving support jack into support position .......... 80

Moving support jack into transport position ........ 79

N

Noise may damage your health.......................... 21

Notes with information and recommendations ..... 9

O

Oils ..................................................................... 48

Öl wechseln ...................................................... 112

Only perform work when the machine is at

standstill ............................................................. 22

Operating support jack ....................................... 79

Operating the Camera Monitor System .............. 84

Operating the stop cock ..................................... 81

Operation............................................................ 74

Operation only after proper commissioning........ 15

Operational safety: Technically sound condition 15

Overload protections on the machine................. 45

Overview of gearboxes..................................... 110

P

Parking the machine........................................... 87

Parking the machine safely ................................ 20

Passengers ........................................................ 15

Performing a visual inspection ......................... 109

Personal protective equipment ........................... 18

Personnel qualification of the operating personnel

........................................................................... 13

Personnel qualification of the technicians .......... 14

Position and meaning of safety labels ................ 26

Preparing the machine for road travel ................ 86

Preparing the machine for shipment .................. 88

Preparing tractor................................................. 60

R

Raised machine and machine parts ................... 23

Raising machine from working position to transport

position ............................................................... 82

Reasonably foreseeable misuse ........................ 12

Re-ordering .......................................................... 6

Repairs, maintenance and settings by technicians

......................................................................... 124

Replacing the shear bolt at the rotary hub ....... 124

Road safety ........................................................ 19

Rotary hub ........................................................ 113

EasyCut F 360 M

Original operating instructions 150000792_04_en 133

19 Index

S

Safety ................................................................. 12

Safety features ................................................... 40

Safety labels on the machine ............................. 25

Safety markings on the machine ........................ 19

Safety routines ................................................... 24

Scope of the document ........................................ 7

Securing raised machine and machine parts

against lowering ................................................. 24

Service life of the machine ................................. 13

Setting the cutting height .................................... 91

Setting the safety device .................................... 97

Settings .............................................................. 91

Shutting down and safeguarding the machine ... 24

Side guard - for the “series” version ................... 76

Side guard - for version with “hydraulically folding

side guards”........................................................ 77

Sources of danger on the machine .................... 21

Start-up............................................................... 57

Structural modifications on the machine ............ 14

T

Target group of this document ............................. 6

Technical data .................................................... 47

Technical limit values ......................................... 16

Technically sound state of the machine ............. 15

Telescopic top link .............................................. 92

Term “machine” .................................................... 7

Tightening guard cloth ........................................ 71

Tightening torques............................................ 101

Top link pin ................................................... 53, 54

U

Unsuitable consumables .................................... 20

V

Validity .................................................................. 6

Venting the friction clutch ................................. 104

W

Warning panel .................................................... 78

Warning signs....................................................... 8

Warnings of property damage/environmental

damage ................................................................ 9

Waste disposal ................................................. 129

Working at or on heights of the machine ............ 23

134

EasyCut F 360 M

Original operating instructions 150000792_04_en

advertisement

Key Features

  • Hydraulic lift system for easy raising and lowering of the mower deck
  • Quick-release blade system for fast and easy blade changes
  • Built-in sharpener for keeping blades sharp
  • Highly maneuverable for use in tight spaces
  • Durable construction for long-lasting performance
  • Easy to use and maintain
  • Versatile machine for a wide range of mowing applications

Related manuals

Frequently Answers and Questions

What is the cutting width of the Krone BA EasyCut F 360 M gez?
The cutting width of the Krone BA EasyCut F 360 M gez. is 3.6 meters.
What is the maximum mowing speed of the Krone BA EasyCut F 360 M gez?
The maximum mowing speed of the Krone BA EasyCut F 360 M gez. is 15 km/h.
What is the weight of the Krone BA EasyCut F 360 M gez?
The weight of the Krone BA EasyCut F 360 M gez. is 750 kg.
What type of blades does the Krone BA EasyCut F 360 M gez. use?
The Krone BA EasyCut F 360 M gez. uses hardened steel blades.
How often should the blades on the Krone BA EasyCut F 360 M gez. be sharpened?
The blades on the Krone BA EasyCut F 360 M gez. should be sharpened every 20-25 hours of use.
What is the warranty on the Krone BA EasyCut F 360 M gez?
The Krone BA EasyCut F 360 M gez. comes with a 2-year warranty.

advertisement

Table of contents