Maintenance. Krone EasyCut 3200 CV, EasyCut 2800 CRi, EasyCut 3200 CRi, BA EasyCut 2800 CRi/3200 CV/3200 CRi 110 Pages
Maintenance. Krone EasyCut 3200 CV, EasyCut 2800 CRi, EasyCut 3200 CRi, BA EasyCut 2800 CRi/3200 CV/3200 CRi
Krone EasyCut 3200 CV, EasyCut 2800 CRi, and EasyCut 3200 CRi disc mowers are designed to efficiently cut grass and other vegetation. Equipped with a robust cutting unit, these mowers ensure clean and precise cuts, promoting healthy regrowth and optimal forage quality. The advanced hydraulic system enables smooth operation and easy adjustment of cutting height and other parameters. The machines boast exceptional durability and reliability, ensuring years of dependable service.
advertisement
Pos: 27.1 /Überschriften/Überschriften 1/U-Z/Wartung @ 0\mod_1199883581050_78.docx @ 36685 @ 1 @ 1
10 Maintenance
Pos: 27.2 /Überschriften/Überschriften 2/P-T/SSpezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1
Maintenance
10.1 Special Safety Instructions
Pos: 27.3 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Warnung - Reparatur-,Wartungs- und Reinigungsarbeiten @ 299\mod_1412929917833_78.docx @ 2341058 @ @ 1
WARNING!
When performing repair, maintenance or cleaning work on the machine, or in case of technical intervention, drive elements may start moving and thus there is a risk of injuries or death.
• Switch off tractor engine, remove the ignition key and carry it with you.
• Secure the tractor against accidental start-up and against rolling.
• Wait until all machine parts have come to a complete stop and have been cooled down completely.
• Perform work on the disc mower only if it is in the working position.
Pos: 27.4 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Bei unregelmäßiger Kontrolle der Messerklingen und Haltebolzen @ 0\mod_1196782406281_78.docx @ 14870 @ @ 1
Danger! - When checking the cutter blades and retaining bolts only sporadically
Effect: Danger to life, injuries or damage to the machine.
• Always check the mowing units for damaged, missing or worn blades, retaining bolts, leaf springs and cutting discs/blade drum before starting operation; replace any parts that are damaged, missing or worn!
• Always replace missing and damaged blades in sets to prevent unbalanced rotation!
• Never mount unevenly worn blades on a drum/disc!
• Whenever a blade is changed, also inspect the fasteners and replace them, if necessary!
Pos: 27.5 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Hinweis - Verweis auf Anziehdrehmomente Verschlussschrauben @ 469\mod_1470667868238_78.docx @ 3167926 @ @ 1
Note
Tighten the locking screws on the gearboxes with the prescribed tightening torques, refer to chapter Maintenance “Tightening Torques for Locking Screws and Bleed Valves on
Gearboxes”.
Pos: 27.6 /Überschriften/Überschriften 3/P-T/PProbelauf @ 0\mod_1196833698843_78.docx @ 15023 @ 3 @ 1
10.1.1 Test run
Pos: 27.7 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Probelauf Einzahl Mähwerk muss auf Boden aufliegen @ 11\mod_1223615241207_78.docx @ 148217 @ @ 1
Danger! - Testing the machine after repair, maintenance or cleaning work and after technical intervention.
Effect: Danger to life or serious injuries
• The mowing unit must be in working position
• Do not switch on the drives until the mowing unit is resting on the ground and you are absolutely sure that neither persons, animals nor objects are in the danger zone.
Pos: 27.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
• Start a trial run of the machine only from the driver’s seat.
57
advertisement
Key Features
- Robust cutting unit for clean and precise cuts
- Advanced hydraulic system for smooth operation and easy adjustments
- Exceptional durability and reliability for years of service