Introduction. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages


Introduction. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Pos: 35 /BA/Sicher heit/EasyC ut/Sicher hei t Ei nführung EasyC ut @ 3\mod_1204553763950_78.docx @ 70812 @ 3 @ 1

Machine Description

4.4 Introduction

The disc mower is equipped with all safety devices (protective devices). However, it is not possible to eliminate all potential hazards on this machine as this would impair its full functional capability. Hazard warnings are attached to the machine in the relevant areas to warn against any dangers. The safety instructions are provided in the form of so-called warning pictograms.

Important information on the position of these safety signs and what they mean is given below!

Pos: 36 /BA/Sicher heit/2. Vor angestellte Warnhi nweise/Warnung - Beschädigte oder unlesbare Warnbildzeichen @ 120\mod_1343305789479_78.docx @ 1099853 @ @ 1


Danger of injury on machine parts if danger zones have not been marked when warning pictograms are missing, damaged or illegible.

Danger of injury due to dangerous parts and other residual risks as users or third parties enter the danger area or reach into it as they are not aware of the danger.

• Immediately replace damaged or illegible labels.

• Following repair work, always attach appropriate adhesive safety labels to all the replaced, modified or repaired components.

• Never clean areas carrying an adhesive safety label using a high-pressure cleaner.

Familiarise yourself with the statement of the warning pictograms. The adjacent text and the selected location on the machine provide information on the special danger spots on the machine.

Pos: 37 /BA/Sicher heit/6. Ü ber arbeitete War nhi nweise/Hi nweis - N achbestellung/ Anbringung Aufkleber @ 357\mod_1438760742670_78.docx @ 2656419 @ 33 @ 1

4.4.1 Re-Ordering Safety Labels and Information Labels


Each safety and information label is provided with an order number and can be ordered directly from the manufacturer or from authorised dealer (refer to chapter “Contact Person”).


Pos: 38 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Attaching Safety Labels and Information Labels

Note - Attaching a label

Effect: Adhesion of label

• The attachment area must be clean, dry and free from dirt, oil and grease.



Related manuals


Table of contents