Detaching the machine. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

Detaching the machine. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Pos: 73.19 /Ü berschriften/Ü berschriften 2/A-E/AAbbau der Maschi ne @ 3\mod_1204792387824_78.docx @ 73245 @ 2 @ 1

Operation

9.6 Detaching the machine

Pos: 73.20 /BA/Sicherheit/EasyCut/Gefahr - M aschine abstell en_ohne H ydrauli kschlauch @ 3\mod_1204793072152_78.docx @ 73283 @ @ 1

Danger! - Unexpected movements of the machine

Pos: 73.21 /Ü berschriften/Ü berschriften 2/F-J/HHalteketten demontier en @ 240\mod_1395128934085_78.docx @ 1889511 @ 2 @ 1

Effect: Danger to life, serious injuries

• No one is permitted inside the danger zone.

• Park the machine on a solid and even surface.

• You should not unhitch the machine until the engine has been switched off and the ignition key has been removed.

• Secure the tractor against rolling.

• Use extreme caution when attaching implements to or detaching them from the tractor! The accident prevention regulations must be complied with absolutely.

• When detaching the machine, do not walk between the tractor and the machine!

9.7 Dismounting Retaining Chains

Pos: 73.22 /BA/Sicherheit/7. Gefahr enhinweise alt/M ähwer ke/Gefahr - Ei nstellung an den Hal teketten @ 4\mod_1211349830489_78.docx @ 83185 @ @ 1

Danger! - Adjustment on the retaining chains

Effect: Danger to life or serious injuries

• The retaining chains may be removed in transport position only. In the working position the retaining chains are subject to high tensile stress.

Pos: 73.23 /BA/Bedienung /EasyC ut/Abbau EC F 320 C V / F360 C V/CR @ 332\mod_1428589668168_78.docx @ 2540608 @ @ 1

• Severe injury may occur if the retaining chains are removed while in the working position.

4 1

3

2

6

7

8

5

Pos: 74 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

EC-498-1

Fig. 38

• Move front mounted mower into transport position.

• Lower parking support.

• Remove supporting chain (1) from the tractor.

• Lower front mounted mower.

• Remove lighting cable on tractor side and put it down on the machine.

• With hydraulically folding side guards design: Disconnect hydraulic hoses on tractor side.

• Remove top link (2) on machine side and fasten it in the support (3) on the tractor.

• Loosen guard cloth (4) on both sides.

• Remove supporting chain (5) of universal shaft on tractor side.

• Remove universal shaft (6) on tractor side and put it down on universal shaft bracket (7).

• Carefully lower front hydraulics (8).

• Carefully move out of the holder.

71

advertisement

Related manuals

advertisement

Table of contents