Trailed Design. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

Trailed Design. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Pos: 75.15 /Ü berschriften/Ü berschriften 3/F-J/GGezogene Ausführung @ 245\mod_1395916618167_78.docx @ 1914247 @ 3 @ 1

10.2.2 Trailed Design

Pos: 75.16 /BA/Erstinbetriebnahme/EasyC ut/F 360 C V/CR/Entlastungsfedern ei nstellen EC F 320 CV / EC F 360 CV/CR gezogen @ 333\mod_1429014682648_78.docx @ 2543289 @ @ 1

1

Pos: 75.17 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Fig. 41

Set the ground pressure of the mower by using the threaded spindle (1).

Turn threaded spindle clockwise = high mower relief = low ground pressure

Turn threaded spindle anti-clockwise = low mower relief = high ground pressure

Setting the ground pressure:

• Turn off PTO shaft.

• Lower mower via front hydraulics of tractor into working position.

• Switch off tractor engine, remove ignition key and carry it with you.

Reducing ground pressure

• Turn threaded spindle (1) clockwise.

Increasing ground pressure

• Turn threaded spindle (1) anti-clockwise.

Settings

75

advertisement

Related manuals

advertisement

Table of contents