After Shearing Off. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

After Shearing Off. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Maintenance

Pos: 80.14 /BA/War tung/Mähwer ke/SchersicherungNach dem Abscher en EasyC ut @ 364\mod_1440501433026_78.docx @ 2678607 @ 3 @ 1

11.6.1 After Shearing Off

Caution! - Correct installation position of the bearing housing not observed.

Effect: Damage to the machine

• Right rotating (RE/RZ) cutting discs and drums always have right-handed pinion shafts and nuts (no groove mark on the pinion shaft and nut).

• Left rotating (LE/LZ) cutting discs and drums always have left-handed pinion shafts and nuts

(with groove mark on the pinion shaft and nut).

7

8 a

9

2

3

3a

3a

3

3a

4 d b

1 c

10

EC-255-1

Fig. 55

92

Pos: 81 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Maintenance

• Remove the cutting disc or drum.

• Remove retaining ring (7).

• Unscrew the hexagon head bolts (8).

• Use the special key (10) included with delivery to remove the nut (2).

• Remove the hub (1).

• Remove the damaged shear pins (3).

• Check the nut and hub for damage. Replace damaged parts with KRONE original replacement parts.

• Fill the space above the bearing with grease (c).

• Place the hub on the pinion shaft.

• Drive the new shear pins (3) through the hub (1) and shaft (4).

Note - Note the position of the shear pins!

• Drive the shear pins (3) into the hole from outside until the end of the pin reaches the surface of the hub (d).

• he slots of the shear pins (3) must be mounted facing each other horizontally (see detail (I)).

• Install the nut (2) using the special key (10) included with delivery (tighten to a tightening torque of 300 Nm).

• Install and tighten the hexagon head bolts (8) with detent edged washers.

• Install the retaining ring (7).

• Install the cutting disc (5) or blade drum (6).

93

advertisement

Related manuals

advertisement

Table of contents