Gearbox for Top Roller Drive. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

Gearbox for Top Roller Drive. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Maintenance - Gearbox

Pos: 100.1 /Ü berschriften/Ü berschriften 2/F-J/GGetri ebe für ober en Walzenantrieb @ 11\mod_1223618840051_78.docx @ 148283 @ 2 @ 1

12.5 Gearbox for Top Roller Drive

Pos: 100.2 /Abkürzungen /CR- Ausführung @ 194\mod_1383299073254_78.docx @ 1647987 @ @ 1

CR design

Pos: 100.3 /BA/War tung/Hinweis Ölstandskontroll e in Ar beitsstellung und in waager echter Stellung der M aschine vor nehmen @ 194\mod_1383554973754_78.docx @ 1649577 @ @ 1

Note

Perform oil level check and oil change while the machine is in a horizontal position!

Pos: 100.4 /BA/War tung/Öl kontroll e_Wechsel/M ähwer ke/Bild Getriebe für oberen Walzenantri eb CR @ 194\mod_1383559678635_78.docx @ 1649994 @ @ 1

3

1

2

Fig. 60

Pos: 100.5 /BA/War tung/Öl kontroll e_Wechsel/Öl wechsel / Öl kontroll e:Leg ende zu Gr afi k Kontrollschraube / Abl assschr aube / Ei nfüllschr aube @ 194\mod_1383288259662_78.docx @ 1647783 @ @ 1

1) Inspection screw / control hole

3) Filler plug / oil filling hole

EC-453-0

2) Drain plug

Pos: 100.6 /BA/War tung/Öl kontroll e_Wechsel Ölqualität/Öl menge: si ehe Kapitel Technische D aten der M aschine @ 371\mod_1441958324612_78.docx @ 2710777 @ @ 1

Oil quality/amount of oil: refer to chapter entitled Technical Data of Machine “Operating

Materials”

Pos: 100.7 /BA/War tung/Öl kontroll e_Wechsel/Öl kontrolle / Öl wechsel Inter vall : siehe Kapitel Wartung „Wartungstabell e“ @ 134 \mod_1350483605921_78.docx @ 1188115 @ @ 1

Interval for oil level check and oil change: refer to chapter Maintenance “Maintenance Table”

Pos: 100.8 /BA/War tung/Öl kontroll e_Wechsel Öl kontr olle N EU über Kontr ollschr aube @ 140\mod_1355141753680_78.docx @ 1244582 @ @ 1

Pos: 100.9 /BA/War tung/Öl kontroll e_Wechsel Öl wechsel NEU @ 140\mod_1355142057277_78.docx @ 1244610 @ @ 1

Oil level check:

• Screw out inspection screw.

• Oil level up to control hole.

If the oil reaches the control hole:

• Screw in the inspection screw and tighten it securely.

If the oil does not reach the control hole:

• Screw out filler plug.

• Top up oil via oil filling hole until the control hole is reached.

• Screw in the inspection screw and the filler plug and tighten them securely.

Oil change:

Collect escaping oil in a suitable container.

• Screw out oil drain plug and drain the oil.

• Screw out inspection screw and filler plug.

• Screw in oil drain plug and tighten it securely.

• Top up new oil via oil filling hole until the control hole is reached.

• Screw in the inspection screw and the filler plug and tighten them securely.

Pos: 100.10 /BA/Wartung/Öl kontr olle_Wechsel/Hi nweis - Altöl ordnungsgemäß entsorgen @ 0\mod_1197008117002_78.docx @ 15550 @ @ 1

Pos: 101 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Note

The used oil must be disposed of correctly

98

advertisement

Related manuals

advertisement

Table of contents