Blade Quick-Fit Device. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

Blade Quick-Fit Device. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Pos: 111.13 /BA/Wartung/M ähwer ke/M esserschr aub / M esserschnellverschluss/M esserschnellverschluss H altebolzen 14mm @ 0\mod_1197268087875_78.docx @ 16444 @ 3 @ 1

13.1.3 Blade Quick-Fit Device

Maintenance - Blade Changing

Danger! - Insufficient thickness of material on the retaining bolts.

Effect: Danger to life or serious injuries.

• At every blade changing check the thickness of the holding bolts material.

• Damage or worn retaining bolts must always be replaced by sets on each cutting disc/blade drum!

• The material thickness of the retaining bolts must not be less than 14 mm at the weakest point.

• The material thickness of the leaf spring must not be less than 3 mm at the weakest point.

Pos: 111.14 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Fig. 67 min. 14 mm

EC-239-0

105

advertisement

Related manuals

advertisement

Table of contents