Blade Quick-Fit Device. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

Blade Quick-Fit Device. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Pos: 111.28 /Ü berschriften/Ü berschriften 3/K- O/MMesserschnell verschluss @ 0\mod_1197271019859_78.docx @ 16597 @ 3 @ 1

13.2.2 Blade Quick-Fit Device

Pos: 111.29 /BA/Wartung/M ähwer ke/M esserschr aub / M esserschnellverschluss/Beschr eibung M esser wechsel M esserschnellverschluss @ 0\mod_1197271100500_78.docx @ 16616 @ @ 1

Maintenance - Blade Changing

2 3 4

5

EC-251-0

Fig. 72

• Clean the area.

• Remove damaged or worn blades.

• Push the special tool (1) {blade key} between the cutter disc (4) and leaf spring (3) and press down with one hand.

• Guide a new blade (2) onto the retaining bolt and allow the blade key to return upwards.

• After fitting the blades, fold the protective device down again.

Note

• The cutter blades of anticlockwise rotating cutting discs / blade drums are different than those of clockwise rotating ones. Make certain the direction of rotation is correct when installing!

• The arrow on the cutter blades must match the direction of rotation of the corresponding cutting discs / blade drums.

• The hex nut (4) used to secure the retaining bolts must not be used more than once.

Order No. for clockwise rotating blade: 139-889

Pos: 111.30 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Order No. for anticlockwise rotating blade: 139-888

111

advertisement

Related manuals

advertisement

Table of contents