Placing in Storage. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV

Add to My manuals
122 Pages

advertisement

Placing in Storage. Krone EasyCut F 360 CV, EasyCut F 360 CR, EasyCut F 320 CV | Manualzz

Pos: 116.1 /Ü berschriften/Ü berschriften 1/A-E/Einl ager ung @ 0\mod_1197385459120_78.docx @ 19966 @ 1 @ 1

Placing in Storage

15 Placing in Storage

Pos: 116.2.1 /BA/Ei nlag erung/Maschi ne an einem trockenem Ort abstellen @ 70\mod_1305630069850_78.docx @ 638292 @ @ 1

• Park the machine in a dry location, but not in the vicinity of artificial fertilisers or livestock buildings.

Pos: 116.2.2 /BA/Ei nlag erung/Vor der Einwi nterung di e M aschine i nnen und außen gründlich r einigen @ 70 \mod_1305635346852_78.docx @ 638460 @ @ 1

Pos: 116.2.3 /BA/Ei nlag erung/Gelenkwelle ausei nanderzi ehen und einfetten @ 70\mod_1305631424563_78.docx @ 638348 @ @ 1

• Before placing the machine in winter storage, clean inside and outside thoroughly. If you use a high-pressure cleaner to do this. do not keep a stream of water directed at bearing points. After cleaning is completed, lubricate all lubrication points. Do not wipe off any grease that comes out of bearing points. The hardened grease will provide additional protection against moisture.

• Disassemble the PTO shaft. Lubricate the inner tubes and the guard tube with grease.

Grease the lubrication points on the cross joint and on the bearing rings of the guard tubes.

Pos: 116.2.4 /BA/Ei nlag erung/All e Gelenkstell en ei nöl en @ 70\mod_1305633347429_78.docx @ 638432 @ @ 1

• Oil all joint points!

Pos: 116.2.5 /BA/Ei nlag erung/Lackschäden ausbessern, bl anke Stell en gr ündlich mit R ostschutzmittel konser vier en @ 70\mod_1305630900253_78.docx @ 638320 @ @ 1

Pos: 116.2.6 /BA/Ei nlag erung/All e beweglichen Bauteil e überpr üfen @ 70\mod_1305632768685_78.docx @ 638404 @ @ 1

• Touch up damaged paint and preserve all uncoated areas thoroughly with rust protection agent.

• Check all movable components such as deflector rollers, joints, tension rollers, etc. to make certain they move easily. If necessary remove, clean, grease and remount. If necessary, replace with new parts.

Pos: 116.2.7 /BA/Ei nlag erung/Ver wenden Sie nur Original-KRON E-Ersatzteil e @ 70\mod_1305632212285_78.docx @ 638376 @ @ 1

• Use only original KRONE replacement parts.

Pos: 116.2.8 /BA/Ei nlag erung/Sammelliste erstellen @ 70\mod_1305626681125_78.docx @ 638264 @ @ 1

Perform the necessary repair tasks during the time immediately after the harvest season. Draw up a list of all replacement parts you will need. This will make it easier for your KRONE dealer to process your orders and you will be certain that your machine will be ready for use at the beginning of the next season.

Pos: 116.3 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

115

advertisement

Related manuals

advertisement

Table of contents