Operation. Krone BA EasyCut B 750/890/970, EasyCut B 750, EasyCut B 890, EasyCut B 970

Add to My manuals
114 Pages

advertisement

Operation. Krone BA EasyCut B 750/890/970, EasyCut B 750, EasyCut B 890, EasyCut B 970 | Manualzz

Pos: 70.1 /Überschriften/Überschriften 1/A-E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 1 @ 1

Operation

10

Pos: 70.2 /Überschriften/Überschriften 2/U-Z/VVor dem M äheinsatz @ 3\mod_1204788384465_78.docx @ 73168 @ 2 @ 1

Operation

10.1 Before mowing

Pos: 70.3 /BA/Sicher heit/7. Gefahrenhi nweise alt/Mähwer ke/Gefahr - Arbeitseinsatz / M ähen @ 73\mod_1307695972255_78.docx @ 654926 @ @ 1

DANGER! - Using the machine for work

Effect: Danger to life, injuries or damage to the machine.

• The glide skids must rest on the ground before start-up and during work

• Maintain an adequate safety distance from the cutting tools during operation

• There is danger of foreign objects being forcibly ejected even when the machine is operated properly. Persons must therefore be directed out of the danger zone of the machine.

Pos: 70.4 /BA/Bedi enung /EasyC ut/Mähen/M ähen EC B 1000 / B 870 @ 100\mod_1330355620077_78.docx @ 892830 @ 2 @ 1

• Special care should be taken when working near roads and buildings)

10.2 Mowing

• Swivel parking supports into transport position.

• Move the machine to the working position.

• Block the rear power lift.

• Fold down the safety device.

• Set the lateral guides correctly.

• Before switching on the PTO make sure that the selected RPM and the direction of rotation of the tractor PTO agrees with the direction of rotation of the machine and its permitted maximum RPM.

• Before driving into the crop engage the tractor PTO in neutral gear and slowly bring it up to the nominal machine RPM.

• Drive into the crop.

• Check the mowing unit suspension during mowing.

• To ensure a clean cut, adjust the driving and cutting speeds to the prevailing conditions (soil condition, state of the crop, height, density).

Pos: 70.5 /BA/Bedi enung /EasyC ut/Hinweis Bei m M ähen Steuer ventil schwi mmstell ung/senken @ 9\mod_1220881412391_78.docx @ 128661 @ @ 1

Pos: 70.6 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Note! - While mowing

Effect: Proper use of the machine

• Leave control unit(s) in the "Lower" or "Float position" position for work.

47

advertisement

Related manuals

advertisement

Table of contents