Managing Web Page Security. Kramer VS-88UHDA 86 Pages
advertisement
Kramer Electronics Ltd.
Performing a Factory Reset
To reset the device to its factory default values:
1. In the Navigation pane, click Device Settings . The Device Settings page appears
2. Click Reset . The following window appears:
Figure 26: Device Settings Page – Factory Reset
3. Click OK to start factory reset and follow the instructions on-screen.
Performing Firmware Upgrade
To perform firmware upgrade:
1. In the Navigation pane, click Device Settings . The Device Settings page appears
2. Click BROWSE and select the new firmware file.
3. Click START UPGRADE and follow the instructions on-screen.
Managing Web Page Security
Use the Security page to set Web access permission:
Setting Web Page Access Permission
To define access to the Web pages In the Navigation pane, click Password Settings . The
Password Settings page appears displaying the current status (password protected or free access).
To access Web pages without using the password:
1. Check the current security settings.
Figure 27: Password Settings Page
– Password Protected
VS-88UHDA - Using the Embedded Web Pages 40
2. Set Activate Security to OFF .
The following message appears:
Figure 28: Password Settings Page – Deactivating the Security
3. Click OK .
The Web page reloads.
To access Web pages using the password:
1. Check the current security status.
Kramer Electronics Ltd.
Figure 29: Password Settings Page
– Security Deactivated
2. Set Activate Security to ON for Web page password protection. The following message appears:
Figure 30: Password Settings Page
– Security Activation Message
3. Click OK .
The connection is interrupted and authentication is required to access Web pages.
Figure 31: Password Settings Page – Security Log In
VS-88UHDA - Using the Embedded Web Pages 41
Kramer Electronics Ltd.
4. Type the User Name (Admin, by default) and Password (left empty by default).
Figure 32: Password Settings Page – Password Protection
5. Click Log In .
6. Select Password from the Navigation pane.
Figure 33: Password Settings Page
– Setting the Admin Password
7. Type the new Admin password twice in both Admin password text boxes.
Figure 34: Password Settings Page
– Entering the Admin Password
8. Click . The following message appears:
Figure 35: Password Settings Page
– Password Warning
VS-88UHDA - Using the Embedded Web Pages 42
advertisement