Viewing the About Page. Kramer VS-88UHDA 86 Pages
advertisement
▼
Scroll to page 2
of
86
4. Click UPLOAD . The following message appears:
Kramer Electronics Ltd.
Figure 52: EDID Management Page
– EDID Message
5. Click OK .
6. Follow the instructions on-screen.
When viewing the 7-segment display in the EDID mode, the input with EDID read from a file will display “ L ”
Viewing the About Page
The VS-88UHDA About page lets you view the Web page version and Kramer Electronics Ltd details.
VS-88UHDA - Using the Embedded Web Pages
Figure 53: About Page
54
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 3 Getting Started
- 3 Achieving the Best Performance
- 4 Safety Instructions
- 4 Recycling Kramer Products
- 4 Overview
- 4 Exceptional Quality
- 4 Advanced and User-friendly Operation
- 5 Flexible Connectivity
- 5 Typical Applications
- 5 Controlling your VS-88UHDA
- 10 Connecting Balanced/Unbalanced Stereo Audio Output
- 10 Connecting to VS-88UHDA via RS-232
- 10 Connecting VS-88UHDA via the ETHERNET Port
- 11 Connecting the Ethernet Port Directly to a PC
- 13 Connecting the Ethernet Port via a Network Hub or Switch
- 13 Control Configuration via the Ethernet Port
- 14 Routing the Signals
- 15 Switching the Video Signal
- 15 Routing an Audio Input to the Analog Audio Output
- 17 Routing an Audio Input to the Digital HDMI Output
- 19 Switching the Video and the Audio Signal Simultaneously
- 20 Muting/Unmuting an Output
- 20 Routing a Pattern to the Output
- 21 Operating in ARC Mode
- 21 Routing HDMI Audio Output Signals to the Balanced Audio Outputs
- 23 Routing HDMI Audio Output Signals to HDMI Input Ports 1, 3, 5 and 7
- 24 Routing Analog Audio Inputs to HDMI Input Ports 1, 3, 5 and 7
- 26 Storing and Recalling a Setup
- 27 Setting the Switching Mode
- 27 Setting the Switching Speed
- 28 Setting HDCP
- 28 Copying the EDID
- 33 Switching and Setting the Ports
- 33 Viewing and Adjusting the Output Settings
- 34 Viewing and Adjusting the Input Settings
- 34 Setting Inputs 2, 4, 6 and 8
- 35 Setting Inputs 1, 3, 5 and 7
- 37 Switching an input to an output
- 38 Switching a Pattern to an Output
- 39 Switching Audio in Breakaway Mode
- 41 Changing Device Settings and Upgrading the Firmware
- 41 Changing the Ethernet Settings
- 42 Performing a Factory Reset
- 42 Performing Firmware Upgrade
- 42 Managing Web Page Security
- 42 Setting Web Page Access Permission
- 45 Setting the Timeout
- 47 Setting Switching Modes
- 49 Setting Step-in Devices
- 50 Managing the EDID
- 56 Viewing the About Page
- 57 Default Communication Parameters
- 58 Default Parameters
- 60 Understanding Protocol 3000
- 61 Kramer Protocol 3000 Syntax
- 62 Protocol 3000 Commands
- 62 Common Commands
- 62 #
- 63 BUILD-DATE
- 63 FACTORY
- 63 HELP
- 64 MODEL
- 64 PROT-VER
- 64 RESET
- 65 SN?
- 65 VERSION?
- 65 IDV
- 66 LOCK-FP
- 66 NAME
- 66 NAME-RST
- 67 System Commands
- 67 SIGNAL
- 68 PRST-VID?
- 68 PRST-STO
- 69 PRST-RCL
- 69 BAUD
- 70 HDCP-STAT
- 70 HDCP-MOD
- 71 FPGA-VER
- 71 Authentication Commands
- 71 LOGIN
- 72 LOGOUT
- 72 PASS
- 72 SECUR
- 73 EDID Handling Commands
- 73 CPEDID
- 74 Switch Commands
- 74 AV
- 74 VID
- 75 AUD
- 76 DISPLAY
- 76 INFO-IO
- 77 INFO-PRST
- 77 PRST-AUD
- 78 Switching Commands
- 78 MTX-MODE
- 79 ROUTE
- 79 VMUTE
- 80 Audio Commands
- 80 BALANCE
- 80 MUTE
- 81 AUD-LVL
- 81 AUD-SIGNAL
- 82 Communication Commands
- 82 ETH-PORT
- 82 NET-DHCP
- 83 NET-GATE
- 83 NET-IP
- 83 NET-MAC
- 84 NET-MASK