Kramer Protocol 3000 Syntax. Kramer VS-88UHDA

Kramer Electronics Ltd.

Kramer Protocol 3000 Syntax

The Kramer Protocol 3000 syntax uses the following delimiters:

 CR = Carriage return (ASCII 13 = 0x0D)

 LF = Line feed (ASCII 10 = 0x0A)

 SP = Space (ASCII 32 = 0x20)

Some commands have short name syntax in addition to long name syntax to enable faster typing. The response is always in long syntax.

The Protocol 3000 syntax is in the following format:



Host Message Format:

Start Address

(optional)

#

Body

Device_id @ Message

Delimiter

CR



Simple Command – Command string with only one command without addressing:

Start

#

Body

Command SP

Parameter_1,Parameter_2,…

Delimiter

CR



Command String – Formal syntax with command concatenation and addressing:

Start Address

# Device_id @

Body

Command_1

Parameter1_1,Parameter1_2,…|

Command_2

Parameter2_1,Parameter2_2,…|

Command_3

Parameter3_1,Parameter3_2,… |…

Delimiter

CR



Device Message Format :

Start Address

(optional)

~

Body

Device_id @ Message

Delimiter

CR LF



Device Long Response – Echoing command:

Body Start Address

(optional)

~ Device_id @

Delimiter

Command SP [ Param1 ,Param2 … ] result CR LF

VS-88UHDA - Protocol 3000 59