Program Schedule Setup. Dimplex North America Z49-00007


Add to My manuals
75 Pages

advertisement

Program Schedule Setup. Dimplex North America Z49-00007 | Manualzz

Program Schedule Setup

Program Setup "Quick Set"

The program function guides the user through the setup for each of the time settings (Wake, Away,

Home and Sleep), based on the selected zones to set the desired temperatures.

!

NOTE: It is recommended that the main overall programming be done first - i.e. bedrooms during the work week and program the entire day, then perform another setup for another zone to speed up the programming. After the main programming is complete, fine tuning can be done on a single day, zone or event basis, by holding down the day or event icon for 3 seconds.

!

NOTE: There is a blank setting table at the back of this manual to assist with ensuring that all of the required events and zones have been setup to the desired times and temperatures.

CAUTION: Always press the icons with a blunt object. Sharp objects like pen and pencil points may damage the touch screen.

1. Press the icon to start the setup. The first setting will be for the Wake Event

!

. The zone icons will begin to flash.

NOTE: At any time, pressing the icon will return to the previous step. If the icon is held for

3 seconds it will return to the main operating screen.

2. Select the zone(s) that the settings are going to be applied.

!

NOTE: As each zone is selected it will become solid and the remaining zones will continue to flash.

3. Press the icon.

4. The day icons will begin to flash.

5. Select the days that the settings are going to be applied.

!

NOTE: As each day is selected it will become solid and the remaining days will continue to flash.

6. Press the icon.

7. Using the and icons on either side of the time setting, set the time for the Wake event to occur.

13

Program Schedule Setup

8. Press the icon.

9. Using the and icons on either side of the temperature setting, set the temperature for the Wake event to adjust to.

10. Press the icon.

11. Repeat steps 2-10 for each of the other events - Away,

Home and Sleep.

!

NOTE: There is a blank setting table at the back of this manual to assist with ensuring that all of the required events and zones have been setup to the desired times and temperatures.

Factory Reset

If the programmed settings need to be adjusted significantly, it is possible to Reset the controller back to the Factory settings.

1. Press and hold the icon for 10 seconds.

2. Follow the prompts to confirm the day, time, and unit of measurement.

14 www.dimplex.com

advertisement

Related manuals