Operation. Dimplex North America Z49-00007


Add to My manuals
75 Pages

advertisement

 Operation. Dimplex North America Z49-00007 | Manualzz

Operation

Once the programming is complete and the heaters have been synchronized, the controller has built in functions that can add to the overall flexible benefits of the system.

During regular operation, the temperature setting in each Zone can be displayed by selecting the desired Zone.

To see the setting for the next

Day or Event for a particular

Zone, press the corresponding icon to display the setting and set time. The setting will remain displayed for 5 seconds, before reverting back to the regular operating screen.

CAUTION: Always press the icons with a blunt object. Sharp objects like pen and pencil points may damage the touch screen.

Set Point Changes

The user has the option at any time to adjust a particular temperature setting without changing the main program.

There are two types of temperature changes that can be used:

1. Temporary or

2. Indefinite

Temporary Temperature Changes

If the temperature in a particular

18 www.dimplex.com

Operation

zone or multiple zones needs to be adjusted for the remainder of the current event a Temporary

Temperature Change can be done.

1. Select the Zone to which the temperature change will be applied.

2. Using the and icons, adjust the set point to the desired temperature.

3. Select additional Zones if needed.

!

NOTE: All of the settings will adjust to these programmed settings at the next event for each of the specified zones.

Indefinite Temperature Changes

If the temperature in a particular zone or multiple zones needs to be adjusted for an indefinite period of time, an Indefinite Temperature Hold can be done.

1. Select the Zone to which the temperature hold will be applied.

2. Using the and icons, adjust the set point to the desired temperature.

3. Press and hold the

Icon.

4. Select additional Zones if needed.

5. Press the icon to save the changes and revert back to operation mode.

!

NOTE: To exit the hold mode, the user can press the icon.

This will remove all holds that have been applied.

Factory Reset

If the programmed settings need to be adjusted significantly, it is possible to Reset the controller back to the Factory settings.

1. Press and hold the icon for 10 seconds.

2. Follow the prompts to confirm the day, time, and unit of measurement.

19

advertisement

Related manuals