PIN Code Activation. Motorola Mobility IHDT5ZX1

415A79-O 9/22/99 9:40 AM Page 42

Features

Automatic Answer

1. Press F ,

1

.

2. Scroll the menu by pressing H or G until

AUTO ANSROFF displays.

3. Press C once to toggle this feature on, and again to toggle it off.

4. To exit the Feature Menu, press E .

This feature permits you to answer calls without pressing S . When your phone receives a call, it will ring twice, then answer the call.

NOTE We suggest that you do not select the

Automatic Answer and Silent Ringer simultaneously since incoming calls will then be announced only by the flashing Call in the display. Also, this feature may be incompatible with certain enhanced system services, such as no-answer transfer. Consult your

Cellular Service Provider.

Multiple Key Answer

1. Press F ,

1

.

2. Scroll the menu by pressing H or G until

MULTKEY ANSROFF displays.

3. Press C once to toggle this feature on, and again to toggle it off.

4. To exit the Feature Menu, press E .

The Multiple Key Answer feature allows you to answer an incoming call by pressing S or any digit key 1 though 9 .

42

Features

Incoming Call Screening

1. Press F ,

1

.

2. Scroll the menu by pressing H or G until

CALL RCV ON displays.

3. Press C once to toggle this feature on

( call rCv off ).

4. To exit the Feature Menu, press E .

Use this feature if you prefer not to receive incoming calls but wish to be informed of the attempt.

When the phone is on and this feature is selected, incoming calls are signaled by several short bursts of tone, Call in the display, and the black on indicator. The caller will receive the "Not in

Service" recording.

As a reminder that incoming call screening is selected, the unit will sound the special tone burst each time it is turned on.

NOTE We suggest you do not select Incoming

Call Screening and Silent Ringer simultaneously, since the incoming call will not be signalled by a short burst of tone.

Silent Ringer

1. Press F , 1 .

2. Scroll the menu by pressing H or G until

RINGER ON displays.

3. Press

C once to toggle this feature on,

( ringer off ) and again to toggle it off.

4. To exit the Feature Menu, press E .

43