AC adaptor. Panasonic Corporation of North America ACJ9TGCF-185A, ACJ9TGCF-183A, ACJ9TGCF-188A, ACJ9TGCF-184A

14

First-time Operation

DC-IN Jack

DC IN 16 V

4

Connect your computer to a power outlet.

CAUTION

Be sure the AC adaptor is connected until completing the first-time use operation.

When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor to the computer.

Handling the AC adaptor

Do not twist or pull the AC power cord forcefully. Doing so may damage the connections.

Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.

When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet.

Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed.

5

Open the display.

1

Pull up latch A and release latch B.

2

Lift open the display.

Latch B

2

Latch A

Power Switch

1

Power Indicator

6

Turn your computer on.

Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.

CAUTION

Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly.

Do not slide the power switch repeatedly.

Once the computer is powered off, you must wait at least ten seconds before powering it on again.

7

Setup Windows.

Moving the cursor ( ) or clicking buttons can be performed with the touch pad ( page 21).

CAUTION

Do not press any keys or touch the touch pad until [Windows XP Professional

Setup] is displayed.

1

2

At [Welcome to the Windows XP Setup Wizard], select [Next].

After reading the agreement, select [I accept this agreement] or [I don’t accept this agreement], then select [Next].

NOTE

If [I don’t accept this agreement] is selected, the Windows setup will be aborted.

3

4

Select settings for your region, then select [Next].

Enter your name and organization and then select [Next].

5 Enter your computer name and administrator password and then select [Next].

CAUTION

Remember this password! If the password is forgotten, Windows cannot be operated.

6

Enter the correct date, time and time zone, then select [Next].

The computer will restart.

NOTE

It may take some time before the computer restarts and the screen of step

7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc.

7

8

Enter your administrator password and select .

At [Welcome to Tablet Computing], you can learn the basic operations for

Microsoft ® Windows ® XP Tablet PC Edition.

NOTE

When Windows setup is completed, the following message will be displayed at the bottom right of the screen: “Your computer might be at risk.” Continue to the next step.

The message is generated by the [Security Center] function in [Control Panel], and does not indicate an error or malfunction. For more information about

[Security Center]: page 27.

If the cursor can not be pointed correctly with the pen, perform [Calibration] in

[start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].

When you perform the calibration, hold the pen at the same angle as you would when actually using it.

Perform the calibration separately for [Landscape] and [Portrait].

8

Create a new account.

1

2

3

4

Select [start] - [Control Panel] - [User Accounts] - [Create a new account].

Enter a name for the new account, then select [Next].

Select [Computer administrator], then select [Create Account].

<When you want to create a password for the new account>

Select the new account you have created and select [Create a password].

Follow the instructions on the screen to create a password.

Select [start] - [Turn Off Computer] - [Restart] to restart the computer.

5

CAUTION

Remember this password! If the password is forgotten, Windows cannot be operated. You can create a password reset disk beforehand ( page 17).

15