FAuLT FINDing. Clarke IQ2000S, 6939006 Infrared Quartz Heater

Add to My manuals
12 Pages

advertisement

FAuLT FINDing. Clarke IQ2000S, 6939006 Infrared Quartz Heater | Manualzz

FAULT FINDING

SYMPTOM PROBLEM SOLUTION

Heater does not operate, although plugged in and switched on.

Plug is loose/ bad connection.

Fuse blown.

Remove the plug & check the connection of the plug and socket.

Replace if necessary and investigate the cause. If fuse blow repeatedly, consult your Clarke dealer.

No power at socket outlet. Insert plug into a suitable socket.

Input voltage incorrect.

Ensure power supply matches the rating on the label.

TECHNICAL SPECIFICATION

Dimensions (L x W x H)

Assembled height on stand

Weight (including stand)

Electrical Supply

Power Cable length

Protection Degree

Operating Temperature

Tilt Range

Heat Output

175 x 480 x 270 (lamp unit) mm

1575 (min) to 1900 (max) mm

10.75 kg

230 V / 50hz

1.8 m

IP24 (water splash)

-20 to 30

°

C

Level to -25 degrees

2 kW

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste

Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

8

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

advertisement

Related manuals