Only the admin AC account can enable this feature. The read only AC account can’t enable this feature.
6.7.
Gateway Batch Configuration
The user can select multiple gateways that belong to the same type (e.g., E1000) and configure them in batch. Batch configuration can speed up the configuration and avoid the error of human operation.
First, please select all the gateways that need to be configured in batches, or select the gateways one by one. After that, please click the edit button in the upper right corner.
Then, the batch configuration page will show up.
NOTE : Only the same type (S2000, E1000, X1000, or X2000) of gateways can be configured in batches.
TIPS : You can select a specific type of gateway through the filter on the top left. If you want to configure more gateways at once, please select showing 100 gateways per page in the lower-left corner.
70 Copyright 2021 Cassia Networks, Inc.
NOTE : The parameters on the batch configuration page at this time are the default parameters, instead of the actual parameters in the Bluetooth gateways. Please only modify the parameters you need to configure in batches. Please ignore the other parameters.
The following general parameters can be configured in batches
• Country of deployment
• Group: The user can tag one gateway with a maximum of three groups. The group can be used to search, filter and sort gateways or send email alert to the users
• Statistical report interval
• AC address
• The priority of communication protocol between AC and gateway: AC address must be filled in before modifying this configuration
• CAPWAP port
• Local RESTful API
• Remote assistance
71 Copyright 2021 Cassia Networks, Inc.
The following Bluetooth parameters can be configured in batches
• Cassia Bluetooth stack switch
• Avoid 2.4G Interference: Reduce interference between 2.4GHz Wi-Fi and
Bluetooth
• BLE scan mode parameters
• BLE connection mode parameters
The following network parameters can be configured in batches
• Network priority
• Ethernet IP allocation method: can only be batch configured to DHCP
• WIFI working mode o In Client mode, the IP allocation method can only be batch configured to
DHCP o Please don’t modify to Hotspot mode in batches. Otherwise, the Hotspot
SSID and password of all gateways will be the same
• Add secondary WIFI: it will work as the backup WIFI SSID if the gateway failed to connect to the first WIFI SSID
NOTE : The cellular modem configuration needs to be configured on the local console of the gateway. They can’t be configured in batches from AC.
72 Copyright 2021 Cassia Networks, Inc.
The parameters of the bypass function can be configured in batches too.
73 Copyright 2021 Cassia Networks, Inc.
Now, you can save the configuration. After clicking the corresponding save button, the batch configuration will start. You can check the progress and results (success or failure) of the configuration on AC.
TIPS
• Only one type of parameter can be configured in batches at a time, for example,
Ethernet parameters and WIFI parameters can’t be configured at the same time.
74 Copyright 2021 Cassia Networks, Inc.
