Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook

Add to my manuals
280 Pages

advertisement

Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook | Manualzz

70

Connecting Other External Devices

Connecting a local printer

2

Click

Pointers and Other Hardware

.

3

Double-click the

Toshiba HW Setup

icon.

4

Select the

Pointing Devices

tab, then click

Simultaneous

.

Connecting a local printer

NOTE

Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a local printer.

NOTE

You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store.

If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable.

Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.

Never connect the printer cable while the computer’s power is on. Doing so may damage the printer, the computer, or both.

These instructions assume you have a parallel printer.

To connect the printer:

5.375 x 8.375 ver 2.3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents