Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook

Add to my manuals
280 Pages

advertisement

Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook | Manualzz

Connecting Other External Devices

Using Slim SelectBay® modules

77

Removing the memory module

3

Carefully remove the module from the slot.

4

Replace the cover plate and screws.

5

Turn the computer over and restart it.

Using Slim SelectBay

®

modules

The Slim SelectBay® gives you additional flexibility. By inserting and removing Slim SelectBay® modules, you can configure your computer for the task at hand without having to carry unnecessary components with you when you travel.

For example, any one of several modules can be used in the

Slim SelectBay®:

DVD-ROM drive. The DVD-ROM drive can also be used as a standard CD-ROM drive.

Multi-function drive

Weight saver insert (a “honeycomb” piece of plastic) that reinforces the Slim SelectBay ® for travel. The weight saver came in your computer’s accessories box.

Secondary battery

5.375 x 8.375 ver 2.3

78

Connecting Other External Devices

Using Slim SelectBay® modules

Secondary hard disk drive (HDD)

HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit www.toshibaaccessories.com

.

Removing a module from the Slim SelectBay

®

NOTE

Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself.

1

Turn off the computer.

You may also hot swap a module in the Slim SelectBay. Stop the module by clicking the

Safely Remove Hardware

icon on the System tray. After the module is stopped, it is safe to remove.

2

Slide the Slim SelectBay ® release toward the rear of the computer.

5.375 x 8.375 ver 2.3

Connecting Other External Devices

Using Slim SelectBay® modules

79

Unlatching the Slim SelectBay

®

3

Slide the module out of the computer.

Sliding the module out

If you are removing the weight saver, retain it for transporting the computer when no other module is installed in the

Slim SelectBay ® .

Inserting a module into the Slim SelectBay

®

To install a module into the Slim SelectBay ® , simply slide the module all the way into the Slim SelectBay ® .

5.375 x 8.375 ver 2.3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents