Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook

Add to my manuals
280 Pages

advertisement

Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook | Manualzz

Windows 2000 Supplemental Information

Using Hibernation

231

Click

All

for the settings to apply whether you are using battery power or outlet power.

7

Click

OK

.

8

Click

OK

again, then close the Control Panel.

NOTE

For more information about the Power Saver utility, see

“Power Saver” on page 167 .

Starting again after Shut down

To start the computer up again, press the power button until the on/off light changes to green.

If you shut down the computer by closing the display panel, you can start it again by opening the display panel.

Using Hibernation

Enabling the Hibernation Command

To use Hibernation, you must first enable the Hibernate option in the Toshiba Power Saver utility.

To access Power Saver Hibernate Properties:

1

Open the

Start

menu, point to

Settings

, then click

Control

Panel

.

2

In the Control Panel window, double-click the

Toshiba

Power Saver

icon.

To enable the Hibernation mode from the Toshiba Power

Saver Properties dialog box:

1

Click the

Hibernate

tab

.

5.375 x 8.375 ver 2.3

232

Windows 2000 Supplemental Information

Using Hibernation

Sample Toshiba Power Saver Hibernate tab

2

Check the box associated with Enable hibernate support.

3

Click

OK

to close the dialog box and click

OK

to close the Toshiba Power Saver utility. Then, close the Control

Panel.

To power down the computer using the Hibernation option, click

Start

,

Shut Down

, select

Hibernate

, then click

OK

.

Sample Shut Down Windows dialog box

5.375 x 8.375 ver 2.3

Windows 2000 Supplemental Information

Using Hibernation

233

The computer saves the state of the system, including all open programs and files, to the hard disk, and then powers down completely.

Going into Hibernation mode more quickly

You can also put the computer into Hibernation mode by either pressing the power button or closing the display panel.

To use either of these methods, you first need to turn on the feature in Toshiba’s Power Saver utility.

1

Open the

Start

menu, point to

Settings

, then click

Control

Panel.

2

In the Control Panel window, double-click the

Toshiba

Power Saver

icon.

3

In the Running on batteries area, choose the power mode of your choice, and click the

Details...

button. Select the

System Power Mode

tab.

4

Select

Hibernation

for the options you want.

When I press the power button

Set this option to Hibernation so that the computer goes into Hibernation mode when you press the power button.

When I close the lid

Set this option to Hibernation so that the computer goes into Hibernation mode when you close the display panel.

5

Click

Override all Modes with settings here.

6

In the Set to range dialog box, do one of the following:

Click

DC only

for the settings to apply only when you are using battery power.

Click

All

for the settings to apply whether you are using battery power or outlet power.

7

Click

OK

.

5.375 x 8.375 ver 2.3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents