Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook

Add to my manuals
280 Pages

advertisement

Toshiba 14.1 TFT XGA LCD MODULE - TECRA S1 (V00002008006) PC Notebook | Manualzz

234

Windows 2000 Supplemental Information

Using Standby

8

Click

OK

again, then close the Control Panel.

NOTE

For more information about the Power Saver utility, see

“Power Saver” on page 167 .

Starting again from Hibernation

To start up the computer from Hibernation mode, press the power button until the on/off light turns green. The computer returns to the screen you were using.

If you activate Hibernation by closing the display panel, you can restart the computer by opening the display panel.

Using Standby

To power down the computer using the Standby command, click

Start

,

Shut Down

, select

Stand by

, then click

OK

.

Sample Shut Down Windows dialog box

The computer saves the status of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light (

On

) flashes amber, indicating the machine is in Standby mode.

5.375 x 8.375 ver 2.3

Windows 2000 Supplemental Information

Using Standby

235

Going into Standby mode more quickly

You can put the computer into Standby mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Standby mode.

To use any of these methods, you first need to enable them in

Toshiba’s Power Saver utility.

1

Open the

Start

menu, point to

Settings

, then click

Control

Panel.

2

In the Control Panel window, double-click the

Toshiba

Power Saver

icon.

The Power Saver Properties dialog box appears.

3

In the Running on batteries area, choose the power mode of your choice, and click the

Details...

button. Select the

System Power Mode

tab.

4

Select

Standby

for the options you want.

When I press the power button

Set this option to Standby so that the computer goes into

Standby mode when you press the power button.

When I close the lid

Set this option to Standby so that the computer goes into

Standby mode when you close the display panel.

5

Click

Override all Modes with settings here.

6

In the Set to range dialog box, do one of the following:

Click

DC only

for the settings to apply only when you are using battery power.

Click

All

for the settings to apply whether you are using battery power or outlet power.

7

Click

OK

.

5.375 x 8.375 ver 2.3

236

Windows 2000 Supplemental Information

Using Standby

8

Click

OK

again, then close the Control Panel.

NOTE

For more information about the Power Saver utility, see

“Power Saver” on page 167 .

Starting again from Standby

To start up the computer from Standby mode, press the power button until the on/off light changes to green. The computer returns to the screen you were using.

If you put the computer in Standby mode by closing the display panel, you can start it again by opening the display panel.

NOTE

If you power down using the Standby command and the battery discharges fully, your information will be lost. Be sure to save your work often.

Quickly changing your Shut down mode

You can quickly and easily change your Shut down mode by using a hot key.

To change your Shut down mode to Standby:

1

Press

Fn

and

F3

simultaneously to display the Standby mode pop-up window.

Sample Standby mode window

5.375 x 8.375 ver 2.3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents