5: Accessory Specifications. Extreme Networks Antennas Specification Guides

Add to my manuals
172 Pages

advertisement

5: Accessory Specifications. Extreme Networks Antennas Specification Guides | Manualzz

5

Accessory Specifications

Low-Loss Antenna Cables

Terminator: WS-CAB-RPSMATERM

Terminator: WS-CAB-NTERM

Attenuators

Extension Bracket: 30515 (WS-MB-WALLEXT01)

This section lists the specifications for cables, terminators, attenuators, and extension brackets.

Low-Loss Antenna Cables

This section outlines the outdoor and indoor optional antenna cables available for use with the antennas. The cables that support the Wave 2 antennas are optional. The Wave 2 antennas can be mounted without the use of cables.

Outdoor Antenna Cables with Standard N-Type Plug and Jack Connectors

The outdoor cables used with the Wave 2 antennas use a Type-N Plug and Type-N Jack; therefore, the part numbers end with "N". Specifications for each cable are listed under the base cable.

Note

The Wave 2 antennas can be mounted outside without the use of cables. If using optional cables, carefully determine the distance between the locations where you intend to mount the

ExtremeWireless AP and the outdoor antenna, to ensure that you order the right cable length.

The low-loss, outdoor, watertight cable is available in standard lengths.

Table 64: Outdoor Antenna Cables with Standard N-Type Plug and Jack Connectors

Cable Refer To

Table 66

on page 166 20 feet (6.1 meters) PFP240 cable (WS-CAB-

L200C20N)

6 feet (1.83 meters) PFP400 cable (WS-CAB-

L400C06N)

20 feet (6.1 meters) PFP400 cable (WS-CAB-

L400C20N)

Table 67 on page 167

Table 67 on page 167

50 feet (15.24 meters) PFP400 cable (WS-CAB-

L400C50N)

75 feet (22 meters) PFP400 cable (WS-CAB-

L400C75N)

Table 67 on page 167

Table 67 on page 167

ExtremeWireless™ External Antenna with Wave 2 165

Accessory Specifications

Table 64: Outdoor Antenna Cables with Standard N-Type Plug and Jack Connectors

(continued)

Cable Refer To

25 feet (7.6 meters) PFP600 cable (WS-CAB-

L600C25N)

Table 68

on page 168

50 feet (15.24 meters) PFP600 cable (WS-CAB-

L600C50N)

Table 68

on page 168

Indoor Antenna Cables with Reverse Polarity SMA-Type Connectors

The indoor cables used with the Wave 2 antennas use a Standard Reverse Polarity SMA-Type Plug connector. Specifications for each cable are listed under the base cable.

Table 65: Indoor Antenna Cables with Standard RPSMA-Type Plug Connector

Cable Refer To

Table 66

on page 166 10 feet (3.05 Meters) PFP240 cable (WS-CAB240-

P10RP)

25 feet (7.62 Meters) PFP240 cable (WS-CAB240-

P25RP)

Table 66

on page 166

Cable Specifications

This section outlines the specifications for each base cable. The outdoor cables support Standard

Polarity Type-N Plug and Type-N Jack. The indoor cables support Reverse Polarity SMA-Type Plug connectors. Each cable listed in this guide is based off of one of the base specifications.

Table 66: WS-CAB-L200C20xx/WS-CAB240xx Cable Specifications

Specification Value

Mechanical

Length

Weight

Bend Radius

Tensile Strength

Environmental

Temperature Range:

6.1 meter (20 ft)

0.002 lb/ft (0.03 kg/m)

0.5 in (12.7mm)

40 lb (18.2 kg)

Operating: -40°C to +85°C (-40°F to +185°F)

Storage: -70°C to +85°C (-94°F to +185°F)

Electrical

Cutoff Frequency

Velocity of Propagation

Shielding Effectiveness

39 GHz

83%

Greater than 90 dBi

ExtremeWireless™ External Antenna with Wave 2 166

Accessory Specifications

Table 66: WS-CAB-L200C20xx/WS-CAB240xx Cable Specifications (continued)

Specification Value

DC Resistance

Peak Power

Connector Type

Cable Loss

Inner Conductor: 5.36 ohms/1000ft (17.6 ohms/km)

Outer Conductor: 4.9 ohms/1000ft (16.1 ohms/km)

2.5 kW

Outdoor antennas support optional cables with Standard Polarity Type-N Plug and Type-N Jack. For example, these cables are used with antennas that support the AP3965e and AP3865e.

Indoor antennas support optional cables with Standard Reverse Polarity SMA-

Type Plug connectors. For example, these cables are used with antennas that support the AP3935e.

2.4 GHz: 3.3 dB

5.3 GHz: 5 dB

5.8 GHz: 5.3 dB

Table 67: WS-CAB-L400Cxx Cable Specifications

Specification Value

Mechanical

Length:

WS-CAB-L400C06

WS-CAB-L400C50

WS-CAB-L400C75

Weight

Bend Radius

Tensile Strength

Environmental

Temperature Range:

6 ft (1.83 m)

50 ft (15.24 m)

75 ft (22.9 m)

0.068 lb/ft (0.10 kg/m)

1.00 in (25.4 mm)

160 lb (72.6 kg)

Operating: -40°C to +85°C (-40°F to +185°F)

Storage: -70°C to +85°C (-94°F to +185°F)

Electrical

Cutoff Frequency

Velocity of Propagation

Shielding Effectiveness

DC Resistance

Peak Power

16.2 GHz

85%

Greater than 90 dBi

Inner Conductor: 1.39 ohms/1000ft (4.6 ohms/km)

Outer Conductor: 1.65 ohms/1000ft (5.4 ohms/km)

16 kW

ExtremeWireless™ External Antenna with Wave 2 167

Accessory Specifications

Table 67: WS-CAB-L400Cxx Cable Specifications (continued)

Specification Value

Connector Type Outdoor antennas support optional cables with Standard Polarity Type-N Plug and Type-N Jack. For example, these cables are used with antennas that support the AP3965e and AP3865e.

Cable Loss 50 feet:

2.4 GHz: 3.3 dB

5.3 GHz: 5.2 dB

5.8 GHZ: 5.4 dB

75 feet:

2.4 GHz: 5 dB

5.3 GHz: 7.7 dB

5.8 GHZ: 8.1 dB

Table 68: WS-CAB-L600Cxx Cable Specifications

Specification Value

Mechanical

25 ft (7.6 m)

50 ft (15.24 m)

Length

WS-CAB-L600C25

WS-CAB-L600C50

Weight

Bend Radius

Tensile Strength

Environmental

Temperature Range:

0.131 lb/ft (0.20 kg/m)

1.50 in (38.1 mm)

350 lb (158.9 kg)

Operating: -40°C to +85°C (-40°F to +185°F)

Storage: -70°C to +85°C (-94°F to +185°F)

Electrical

Cutoff Frequency

Velocity of Propagation

Shielding Effectiveness

DC Resistance

Peak Power

Connector Type

Cable Loss

10.3 GHz

87%

Greater than 90 dBi

Inner Conductor: 0.53ohms/1000ft (1.7 ohms/km)

Outer Conductor: 1.2 ohms/1000ft (3.9 ohms/km)

40 kW

Outdoor antennas support optional cables with Standard Polarity Type-N Plug and Type-N Jack. For example, these cables are used with antennas that support the AP3965e and AP3865e.

25 feet:

2.4 GHz: 1.1 dB

5.3 GHz: 1.7 dB

5.8 GHz: 1.8 dB

50 feet:

2.4 GHz: 2.2 dB

5.3 GHz: 3.5 dB

5.8 GHz: 3.6 dB

ExtremeWireless™ External Antenna with Wave 2 168

Accessory Specifications

Terminator: WS-CAB-RPSMATERM

This Terminator is intended to be used with Extreme Networks Wireless products. This Terminator uses a Reverse Polarity SMA Plug, female contact. (See

the following figure .)

Figure 165: Terminator Detail View

Table 69: Terminator Specifications

Specification

Shell and Body material

Connector Type

Frequency Range

Impedance

VSWR

Power Rating

Value

Brass

Reverse Polarity SMA Plug

0–6.0 GHz

50 ohms (nominal)

</- 1.50 @ 0–6.0 GHz

1 watt

Terminator: WS-CAB-NTERM

This Terminator is intended to be used with Extreme Networks Wireless Products. This Terminator is a

0-6 GHz, 50 Ohm, Type-N Terminator with a 1 Watt power rating.

ExtremeWireless™ External Antenna with Wave 2 169

Accessory Specifications

Figure 166: WS-CAB-NTERM

Table 70: Terminator Specifications

Specification

Shell and Body material

Connector Type

Frequency Range

Impedance

VSWR

Power Rating

Value

Brass

Standard Type-N

0–6.0 GHz

50 ohms (nominal)

1.5: 1 max

1 watt

Attenuators

Optional attenuators are available. There is a 6dB attenuator and a 10dB attenuator available with different connector types: Reverse Polarity SMA Plug-Female contact/Reverse Polarity SMA Jack-Male contact and a Type-N plug-Female/Jack-Male contact. For details, see

Table 71 on page 171.

ExtremeWireless™ External Antenna with Wave 2 170

Accessory Specifications

Optional Attenuators:

• WS-CAB-06DBATN with Reverse Polarity SMA Plug/Jack, Female/Male contacts

• WS-CAB-10DBATN with Reverse Polarity SMA Plug/Jack, Female/Male contacts

• WS-CAB-06DBATN-SN with Type-N plug-Female/Jack-Male contacts

• WS-CAB-10DBATN-SN with Type-N plug-Female/Jack-Male contacts

Figure 167: Attenuator Detail View Showing a Reverse Polarity SMA Plug and Jack

Figure 168: Attenuator Detail View Showing a Standard N-Type Plug and Jack

Table 71: Attenuator Specifications

WS-CAB-06DBATN, WS-

CAB-10DBATN

Value

WS-CAB-6DBATN-SN, WS-

CAB-10DBATN-SN

Specification

Mechanical

Length (L)

Weight

Housing

Connector Type

.86 in. +/- .03 in.

0.2 ounces

Stainless Steel, Passivated

Reverse Polarity SMA Plug/Jack,

Female/Male contacts

2.1 ounces

Brass Nickel Plated

Type-N plug-Female/Jack-

Male contacts

Environmental

Operating Temperature Range -55°C to +85°C (-67°F to +185°F)

ExtremeWireless™ External Antenna with Wave 2 171

Accessory Specifications

Table 71: Attenuator Specifications (continued)

Value

Specification WS-CAB-06DBATN, WS-

CAB-10DBATN

WS-CAB-6DBATN-SN, WS-

CAB-10DBATN-SN

Electrical

Frequency Range

Impedance

VSWR

Power Rating

Average

Hz-6.000 GHz

50 ohms (nominal)

1.20:1 Max Hz-6.01.25:1

2 watts (5 uSec Pulse, 0.05% duty cycle)

Peak

Attenuation

250 watts

Value

WS-CAB-06DBATN, WS-CAB-6DBATN-SN 6 +/- 0.50 dB

WS-CAB-10DBATN, WS-CAB-10DBATN-SN 10 +/- 0.50 dB

Extension Bracket: 30515 (WS-MB-WALLEXT01)

The WS-MB-WALLEXT01 Extension Bracket Kit (P/N: 30515) supports the Wave 2 antennas that are

listed in the following table

, extending the antenna tilt up to 90 degrees for these antennas when mounted on a pole or wall.

All of these antennas ship with a standard antenna mounting kit that allows for approximately a 70 degree tilt. The optional WS-MB-WALLEXT01 Extension Bracket Kit works with the standard kit to allow a greater tilt, up to 90 degrees.

The standard mounting kit includes instructions on how to use the optional WS-MB-WALLEXT01

Extension Bracket Kit (P/N: 30515).

Table 72: Wave 2 Antennas that support the WS-MB-WALLEXT01 Extension Bracket

Kit (P/N: 30515)

Antenna Supported AP Model

30702

30705

30707

3935

3935

3935

30711

30714

30715

30718

30720

WS-AO-5D23009N

3965

3965

3965

3965

3965

3965

ExtremeWireless™ External Antenna with Wave 2 172

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents