Neutral Release Lever. TOHATSU BFT 115A, BFT 150A
advertisement
36ZX1T120_EN.book Page 17 Tuesday, November 28, 2017 4:48 PM
Neutral Release Lever
(R1 type)
REMOTE CONTROL LEVER
Engine Switch
(R1 type)
OFF
CONTROLS AND FEATURES
(R2, R3 types)
ON
START
ON
START
OFF
ON
NEUTRAL
RELEASE LEVER
(R2 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER
The neutral release lever is set on the remote control lever to prevent an accidental operation of the remote control lever.
The remote control lever does not operate unless it is moved while pulling the neutral release lever up.
ENGINE
SWITCH KEY
This remote control is equipped with an automotive type engine switch.
On the side-mount type (R1 type), the engine switch locates on your side near the remote control box.
On the panel-mount type (R2 type) and the top-mount type (R3 type), the engine switch locates at the center of the control panel.
Key positions:
START: to start the engine.
ON:
OFF: to run the engine after starting.
to stop the engine
(IGNITION OFF).
OFF START
ENGINE SWITCH KEY
Do not leave the engine switch
(ignition switch) ON (key in ON position) when the engine is not running as the battery will discharge.
The starter motor will not work unless the remote control lever is in the NEUTRAL position, and the clip is in the emergency stop switch.
17
advertisement