Cooling Water Check Hole. TOHATSU BFT 115A, BFT 150A

36ZX1T120_EN.book Page 27 Tuesday, November 28, 2017 4:48 PM

Cooling Water Check Hole

COOLING WATER CHECK HOLE

CONTROLS AND FEATURES

Engine Cover Latch Cooling Water Intake Port

COOLING WATER INTAKE PORT

(each side)

The cooling water is checked here to see whether it is circulating inside the engine properly.

After starting the engine, check at the cooling water check hole whether the cooling water is circulating through the engine.

The engine cooling water is drawn into the engine through this port.

ENGINE COVER LATCH

Pull the engine cover latch to remove the engine cover.

Download PDF