- Vehicles & accessories
- Motor vehicle accessories & components
- Engine
- TOHATSU
- BFT 150A
- Owner's manual
- 130 Pages
5. INSTALLATION. TOHATSU BFT 115A, BFT 150A
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
36ZX1T120_EN.book Page 31 Tuesday, November 28, 2017 4:48 PM
5. INSTALLATION
Transom Height
Improperly installed outboard motor can result in the outboard motor dropped into the water, boat not able to cruise straight ahead, engine speed not increase, and much fuel consumption.
We recommend that the outboard motor be installed by an authorized
TOHATSU outboard motor dealer.
Consult the authorized TOHATSU dealer in your area for the Y-OP (User
Optional Parts)/equipments installation and operation.
Applicable Boat
Select the boat suitable for the engine power.
Engine power:
BFT115A: 84.6 kW (115 PS)
BFT150A: 110.3 kW (150 PS)
Power recommendation is indicated on most of the boats.
Do not exceed the boat manufacturer’s power recommendation. Damage and injury may result.
T
Type:
L:
X:
T (Outboard Motor
Transom Height)
< when transom angle is 12° >
508 mm (20.0 in)
635 mm (25.0 in)
Select the outboard motor which is correct for the boat transom height of your boat.
31
advertisement
Related manuals
advertisement
Table of contents
- 8 1. SAFETY
- 8 SAFETY INFORMATION
- 10 2. SAFETY LABEL LOCATIONS
- 12 3. COMPONENT IDENTIFICATION
- 16 4. CONTROLS AND FEATURES
- 16 Remote Control Lever
- 16 R1 type
- 17 R2 type
- 18 R3 type
- 19 Neutral Release Lever
- 19 Engine Switch
- 20 Fast Idle Lever/Fast Idle Button
- 21 PGM-FI Indicator/Buzzer
- 21 ACG Indicator/Buzzer
- 22 Oil Pressure Indicator/Buzzer
- 22 Overheat Indicator/Buzzer
- 22 Water Separator Buzzer
- 23 Power Trim/Tilt Switch
- 24 Trim Meter (optional equipment)
- 24 Power Tilt Switch (outboard motor pan)
- 25 TRL (Trolling) Control Switch
- 25 Manual Relief Valve
- 26 Emergency Stop Switch
- 26 Emergency Stop Switch Lanyard/Clip
- 27 Spare Emergency Stop Switch Clip (optional equipment)
- 28 Tilt Lock Lever
- 28 Trim Tab
- 28 Anode
- 29 Cooling Water Check Hole
- 29 Cooling Water Intake Port
- 29 Engine Cover Latch
- 30 Tachometer (optional equipment)
- 30 NMEA Interface Coupler
- 30 Operating Hour Notification System
- 33 5. INSTALLATION
- 33 Transom Height
- 34 Location
- 34 Installation Height
- 35 Outboard Motor Installation
- 36 Outboard Motor Angle Inspection (Cruising)
- 37 Battery Connections
- 39 Remote Control Installation (optional equipment)
- 40 Remote Control Box Location
- 40 Remote Control Cable Length
- 41 Propeller Selection
- 41 Fuel Line Connection
- 42 6. PRE-OPERATION CHECKS
- 42 Engine Cover Removal/Installation
- 43 Engine Oil
- 46 GASOLINE CONTAINING ALCOHOL
- 47 Propeller and Cotter Pin Inspection
- 48 Remote Control Lever Friction
- 48 Water Separator
- 49 Battery
- 50 Other Checks
- 51 7. STARTING THE ENGINE
- 51 Fuel Priming
- 51 Starting the Engine
- 51 R1 type
- 55 R2, R3 types
- 59 8. OPERATION
- 59 Break-in Procedure
- 60 Gear Shifting
- 60 R1 type
- 61 R2 type
- 62 R3 type
- 63 Cruising
- 65 TRL (Trolling) Control Switch
- 66 Trimming the Outboard Motor
- 68 Trim Meter (optional equipment)
- 69 Tilting the Outboard Motor
- 70 Moorage
- 71 Power Tilt Switch (outboard motor pan)
- 72 Manual Relief Valve
- 73 Trim Tab Adjustment
- 74 Engine Protection System
- 74 PGM-FI and ACG Warning Systems
- 78 Over-rev Limiter
- 78 Anodes
- 78 Shallow Water Operation
- 79 Multiple Outboard Motors
- 80 9. STOPPING THE ENGINE
- 80 Emergency Engine Stop
- 80 Normal Engine Stop
- 82 10. TRANSPORTING
- 82 Fuel Line Disconnection
- 82 Transporting
- 83 Trailering
- 84 11. CLEANING AND FLUSHING
- 85 12. MAINTENANCE
- 86 Tool Kit and Owner’s Manual
- 86 Spare Emergency Stop Switch Clip (optional equipment)
- 87 Maintenance Schedule
- 89 Engine Oil
- 91 Spark Plugs
- 96 Lubrication
- 98 Fuel Filter
- 101 Water Separator
- 103 EMISSION CONTROL SYSTEM
- 104 Battery
- 107 Main Fuse
- 107 ACG Fuse
- 108 Propeller
- 109 Submerged Outboard Motor
- 111 13. STORAGE
- 111 Vapor Separator Draining
- 112 Engine Oil
- 113 Battery Storage
- 114 Outboard Motor Position
- 115 14. DISPOSAL
- 116 15. TROUBLESHOOTING
- 118 16. SPECIFICATIONS
- 121 CONTENT OUTLINE
- 126 18. INDEX