R3 type. TOHATSU BFT 115A, BFT 150A

36ZX1T120_EN.book Page 60 Tuesday, November 28, 2017 4:48 PM

OPERATION

R3 type

Gear Shifting

(R3 type)

(SINGLE TYPE)

(DUAL TYPE)

FORWARD

NEUTRAL

REVERSE

FORWARD

REMOTE CONTROL

LEVER REMOTE

CONTROL

LEVER

NEUTRAL

REVERSE

Avoid sharp and abrupt operation of the remote control lever. Operate it moderately. Operate the remote control lever and raise the engine speed after making sure that the gear was shifted securely.

Move the remote control lever(s) approximately 35° toward the

FORWARD or REVERSE position to engage the desired gear.

REMOTE CONTROL LEVERS

When the boat is mounted with the two outboard motors, hold the remote control lever in the center as shown, and operate the right and left levers simultaneously.

Moving the remote control lever(s) further from approximately 35° will increase throttle opening and boat speed.