Power Tilt Switch (outboard motor pan). TOHATSU BFT 115A, BFT 150A
advertisement
36ZX1T120_EN.book Page 69 Tuesday, November 28, 2017 4:48 PM
(R3 type) (DUAL TYPE)
POWER TRIM/TILT SWITCH
(LEFT) (RIGHT)
Power Tilt Switch
(outboard motor pan)
POWER TILT SWITCH
When the boat is mounted with the two outboard motors, tilt up the right and left outboard motors one by one using the switch. Set the tilt lock lever of one outboard motor at the
LOCK position, then tilt up another outboard motor.
After tilting down the outboard motors, adjust the trim angle of the right and left outboard motors using the switch.
When you are away from the power trim/tilt switch on the control lever side, you can operate the power tilt switch on the outboard motor side.
The switch operation is the same as that of the power trim/tilt switch on the remote control lever side.
Do not operate this power tilt switch on the outboard motor while sailing.
OPERATION
69
advertisement