12. MAINTENANCE. TOHATSU BFT 115A, BFT 150A

36ZX1T120_EN.book Page 83 Tuesday, November 28, 2017 4:48 PM

Periodic maintenance and adjustment are important to keep the outboard motor in the best operating condition.

Service and inspect according to the

MAINTENANCE SCHEDULE.

Shut off the engine before performing any maintenance. If the engine must be run, make sure the area is well ventilated. Never run the engine in an enclosed or confined area.

Exhaust contains poisonous carbon monoxide gas; exposure can cause loss of consciousness and may lead to death.

Be sure to reinstall the engine cover, if it was removed, before starting the engine. Lock the engine cover latch securely (see page 40).

• If the engine must be run, make sure there is water at least 100 mm (4 in) above the anticavitation plate, otherwise the water pump may not receive sufficient cooling water, and the engine will overheat.

• Use only TOHATSU Genuine parts or their equivalents for maintenance or repair. The use of replacement parts which are not of equivalent quality may damage the outboard motor.

12. MAINTENANCE