Outboard Motor Position. TOHATSU BFT 115A, BFT 150A

36ZX1T120_EN.book Page 112 Tuesday, November 28, 2017 4:48 PM

STORAGE

UPPER LEVEL

Outboard Motor Position

(Port side turned down as shown.)

LOWER LEVEL OUTBOARD MOTOR STAND

3. Fill the battery with distilled water to the upper level line. Never overfill the battery.

4. Store the battery on a level surface in a cool, dry, well ventilated place out of direct sunlight.

5. Once a month, check the specific gravity of the electrolyte and recharge as required to prolong battery life.

Transport and store the outboard motor either vertically or horizontally, as shown above. Attach the stern bracket to stand and secure the outboard motor with bolts and nuts. Store the outboard motor in a well-ventilated area free from direct sunlight and humidity.

Vertical transport or storage:

Attach the stern bracket to a stand.

Horizontal transport or storage:

Rest the outboard motor on a cushion of protective material.

Do not place the outboard motor on its side during a prolonged period of storage. If you are obliged to place the outboard motor on its side, drain the engine oil, protect the outboard motor by wrapping it with the urethane material or the blanket as shown.

112