- Vehicles & accessories
- Motor vehicle accessories & components
- Engine
- TOHATSU
- BFT 150A
- Owner's manual
- 130 Pages
16. SPECIFICATIONS. TOHATSU BFT 115A, BFT 150A
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
36ZX1T120_EN.book Page 116 Tuesday, November 28, 2017 4:48 PM
16. SPECIFICATIONS
MODEL
Description Code
Type
Overall length
Overall width
Overall height
Transom height
(when transom angle at 12°)
Dry mass
(weight)*
Rated power
Full throttle range
Engine type
Displacement
Spark plug gap
Remote control steering system
Starter system
Ignition system
Lubrication system
Specified oil
BFT115A
BBHJ
LD
LU
XU
845 mm (33.3 in)
580 mm (22.8 in)
1,665 mm (65.6 in) 1,790 mm (70.5 in)
508 mm
(20.0 in)
635 mm
(25.0 in)
217 kg (478 lbs) 220 kg (485 lbs)
84.6 kW (115 PS)
4,500 – 6,000 min -1 (rpm)
4 stroke DOHC in-line 4-cylinder
2,354 cm 3 (143.6 cu-in)
1.0 – 1.1 mm (0.039 – 0.043 in)
Motor-mounted
Electric starter
Full transistor battery
Trochoid pump pressure lubrication
Engine: API standard SG, SH, SJ SAE 10W-30
Gear case: API standard GL-4 SAE 90 Hypoid gear oil
Oil capacity
D.C. output
Cooling system
Exhaust system
Spark plugs
Fuel pump
Fuel
Gear shift
Steering angle
Tilt angle
(transom angle at 12°)
Trim angle
(transom angle at 12°)
Engine: Without oil filter replacement:
6.5 L (6.9 US qt, 5.7 Imp qt)
With oil filter replacement:
6.7 L (7.1 US qt, 5.9 Imp qt)
Gear case: 0.98 L (1.04 US qt, 0.86 Imp qt)
12V – 40A
Water cooling with thermostat
Water exhaust
ZFR6K-11 (NGK), KJ20DR-M11 (DENSO)
High pressure side: Electrical type
Low pressure side: Mechanical type
Unleaded gasoline
(91 research octane, 86 pump octane, or higher)
Dog type (Forward – Neutral – Reverse)
30° right and left
Stageless (72°)
* Without battery cable, with propeller
This TOHATSU outboard is power rated in accordance with ISO8665 (propeller shaft output).
116
– 4° to 16°
36ZX1T120_EN.book Page 117 Tuesday, November 28, 2017 4:48 PM
SPECIFICATIONS
MODEL
Description Code
Type
Overall length
Overall width
Overall height
Transom height
(when transom angle at 12°)
Dry mass
(weight)*
Rated power
Full throttle range
Engine type
Displacement
Spark plug gap
Remote control steering system
Starter system
Ignition system
Lubrication system
Specified oil
BANJ
LU
1,665 mm (65.6 in)
508 mm (20.0 in)
217 kg (478 lbs)
BFT150A
BANJ
XD
XU
845 mm (33.3 in)
580 mm (22.8 in)
110.3 kW (150 PS)
5,000 – 6,000 min -1 (rpm)
4 stroke DOHC in-line 4-cylinder
2,354 cm 3 (143.6 cu-in)
1.0 – 1.1 mm (0.039 – 0.043 in)
Electric starter
Full transistor battery
BAPJ
XCU
1,790 mm (70.5 in)
635 mm (25.0 in)
220 kg (485 lbs)
Motor-mounted
223 kg (491 lbs)
Trochoid pump pressure lubrication
Engine: API standard SG, SH, SJ SAE 10W-30
Gear case: API standard GL-4 SAE 90 Hypoid gear oil
Oil capacity
D.C. output
Cooling system
Exhaust system
Spark plugs
Fuel pump
Fuel
Gear shift
Steering angle
Tilt angle
(transom angle at 12°)
Trim angle
(transom angle at 12°)
Engine: Without oil filter replacement:
6.5 L (6.9 US qt, 5.7 Imp qt)
With oil filter replacement:
6.7 L (7.1 US qt, 5.9 Imp qt)
Gear case: 0.98 L (1.04 US qt, 0.86 Imp qt)
12V – 40A
Water cooling with thermostat
Water exhaust
ZFR6K-11 (NGK), KJ20DR-M11 (DENSO)
High pressure side: Electrical type
Low pressure side: Mechanical type
Unleaded gasoline
(91 research octane, 86 pump octane, or higher)
Dog type (Forward – Neutral – Reverse)
30° right and left
Stageless (72°)
* Without battery cable, with propeller
This TOHATSU outboard is power rated in accordance with ISO8665 (propeller shaft output).
– 4° to 16°
117
36ZX1T120_EN.book Page 118 Tuesday, November 28, 2017 4:48 PM
SPECIFICATIONS
Noise and Vibration
MODEL
CONTROL SYSTEM
Sound pressure level at operator’s ears
(2006/42/EC, ICOMIA 39-94)
Uncertainty
Measured sound power level
(Reference to EN ISO3744)
Uncertainty
Vibration level at hand arm
(2006/42/EC, ICOMIA 38-94)
Uncertainty
BFT115A
R (Remote control)
80 dB (A)
2 dB (A)
–
–
Not Exceed
2.5 m/s 2
–
BFT150A
R (Remote control)
80 dB (A)
2 dB (A)
–
–
Not Exceed
2.5 m/s 2
–
Reference to: ICOMIA Standard: as it specifies the engine operating conditions and measurement conditions.
118
advertisement
Related manuals
advertisement
Table of contents
- 8 1. SAFETY
- 8 SAFETY INFORMATION
- 10 2. SAFETY LABEL LOCATIONS
- 12 3. COMPONENT IDENTIFICATION
- 16 4. CONTROLS AND FEATURES
- 16 Remote Control Lever
- 16 R1 type
- 17 R2 type
- 18 R3 type
- 19 Neutral Release Lever
- 19 Engine Switch
- 20 Fast Idle Lever/Fast Idle Button
- 21 PGM-FI Indicator/Buzzer
- 21 ACG Indicator/Buzzer
- 22 Oil Pressure Indicator/Buzzer
- 22 Overheat Indicator/Buzzer
- 22 Water Separator Buzzer
- 23 Power Trim/Tilt Switch
- 24 Trim Meter (optional equipment)
- 24 Power Tilt Switch (outboard motor pan)
- 25 TRL (Trolling) Control Switch
- 25 Manual Relief Valve
- 26 Emergency Stop Switch
- 26 Emergency Stop Switch Lanyard/Clip
- 27 Spare Emergency Stop Switch Clip (optional equipment)
- 28 Tilt Lock Lever
- 28 Trim Tab
- 28 Anode
- 29 Cooling Water Check Hole
- 29 Cooling Water Intake Port
- 29 Engine Cover Latch
- 30 Tachometer (optional equipment)
- 30 NMEA Interface Coupler
- 30 Operating Hour Notification System
- 33 5. INSTALLATION
- 33 Transom Height
- 34 Location
- 34 Installation Height
- 35 Outboard Motor Installation
- 36 Outboard Motor Angle Inspection (Cruising)
- 37 Battery Connections
- 39 Remote Control Installation (optional equipment)
- 40 Remote Control Box Location
- 40 Remote Control Cable Length
- 41 Propeller Selection
- 41 Fuel Line Connection
- 42 6. PRE-OPERATION CHECKS
- 42 Engine Cover Removal/Installation
- 43 Engine Oil
- 46 GASOLINE CONTAINING ALCOHOL
- 47 Propeller and Cotter Pin Inspection
- 48 Remote Control Lever Friction
- 48 Water Separator
- 49 Battery
- 50 Other Checks
- 51 7. STARTING THE ENGINE
- 51 Fuel Priming
- 51 Starting the Engine
- 51 R1 type
- 55 R2, R3 types
- 59 8. OPERATION
- 59 Break-in Procedure
- 60 Gear Shifting
- 60 R1 type
- 61 R2 type
- 62 R3 type
- 63 Cruising
- 65 TRL (Trolling) Control Switch
- 66 Trimming the Outboard Motor
- 68 Trim Meter (optional equipment)
- 69 Tilting the Outboard Motor
- 70 Moorage
- 71 Power Tilt Switch (outboard motor pan)
- 72 Manual Relief Valve
- 73 Trim Tab Adjustment
- 74 Engine Protection System
- 74 PGM-FI and ACG Warning Systems
- 78 Over-rev Limiter
- 78 Anodes
- 78 Shallow Water Operation
- 79 Multiple Outboard Motors
- 80 9. STOPPING THE ENGINE
- 80 Emergency Engine Stop
- 80 Normal Engine Stop
- 82 10. TRANSPORTING
- 82 Fuel Line Disconnection
- 82 Transporting
- 83 Trailering
- 84 11. CLEANING AND FLUSHING
- 85 12. MAINTENANCE
- 86 Tool Kit and Owner’s Manual
- 86 Spare Emergency Stop Switch Clip (optional equipment)
- 87 Maintenance Schedule
- 89 Engine Oil
- 91 Spark Plugs
- 96 Lubrication
- 98 Fuel Filter
- 101 Water Separator
- 103 EMISSION CONTROL SYSTEM
- 104 Battery
- 107 Main Fuse
- 107 ACG Fuse
- 108 Propeller
- 109 Submerged Outboard Motor
- 111 13. STORAGE
- 111 Vapor Separator Draining
- 112 Engine Oil
- 113 Battery Storage
- 114 Outboard Motor Position
- 115 14. DISPOSAL
- 116 15. TROUBLESHOOTING
- 118 16. SPECIFICATIONS
- 121 CONTENT OUTLINE
- 126 18. INDEX