show wifi-uplink. Aruba RAP-155, IAP-207, RAP-108, IAP-305, Instant, Instant 6.5.3.0
Anúncio
Anúncio
show wifi-uplink
show wifi-uplink {auth log |config | status}
Description
This command displays the configuration details, the status, and authentication log for the Wi-Fi uplinks configured on an IAP.
Syntax
Parameter auth log config status
Description
Displays the authentication configuration details and an authentication log.
Displays the Wi-Fi configuration parameters enabled on an IAP.
Displays the status of the Wi-Fi uplink.
Usage Guidelines
Use this command to view the information about status and configuration details for the Wi-Fi uplink enabled on an IAP.
Example
show wifi-uplink auth log
The following output is displayed for the show wifi-uplink auth log command:
---------------------------------------------------------------------wifi uplink auth configuration:
----------------------------------------------------------------------
---------------------------------------------------------------------wifi uplink auth log:
----------------------------------------------------------------------
[1536]2013-05-08 23:42:06.647: Global control interface '/tmp/supp_gbl'
show wifi-uplink config
The following output is displayed for the show wifi-uplink config command:
ESSID
Cipher Suite
Passphrase
Band
:Wifi
:wpa-tkip-psk
:test1234
:dot11a
The output for this command displays the following information:
Parameter
ESSID
Cipher Suite
Passphrase
Description
Displays the name of the network for which the Wi-Fi uplink is configured.
Displays the encryption settings configured for the Wi-Fi uplink. For example, wpa-tkip-psk or wpa2-ccmp-psk.
Displays the WPA passphrase configured for the Wi-Fi uplink.
633 | show wifi-uplink Aruba Instant 6.5.3.0 Command-Line Interface | Reference Guide
Parameter uplink-band <band>
Description
Displays the band configured for the Wi-Fi uplink connection. For example, dot11a and dot11g.
show wifi-uplink status
The following output is displayed for the
show wifi-uplink status
command: configured enabled
:YES
:YES
The output of this command indicates if the Wi-Fi uplink is configured and enabled on the IAP.
Command History
Version
Aruba Instant 6.2.1.0-3.3
Description
This command is introduced.
Command Information
IAP Platform
All platforms
Command Mode
Privileged EXEC mode
Aruba Instant 6.5.3.0 Command-Line Interface | Reference Guide show wifi-uplink | 634
Download
Anúncio