Information labels on the machine. Krone BA EasyCut B 970

Add to My manuals
110 Pages

advertisement

Information labels on the machine. Krone BA EasyCut B 970 | Manualzz

Safety

Information labels on the machine

2

2.7

12. Order No. 942 229 0 (3x)

DANGER

• Shield missing, do not operate

13. Order No. 949 228 0 (3x)

DANGER

ROTATING DRIVELINE – CONTACT CAN CAUSE DEATH.

KEEP AWAY!

DO NOT OPERATE WITHOUT-

• All driveline guards, tractor and equipment shields in place.

• Driveline securely attached at both ends.

• Driveline guards that turn freely on driveline.

14. Order No. 27 021 593 0 (1x)

WARNING

Keep tractor hydraulic controls locked during road transport to prevent implement movement and possible personal injury.

2.7

Information labels on the machine

Each information label has an order number. You can order the labels directly from your

KRONE dealer. Replace missing, damaged and illegible information labels immediately.

Prior to attaching an information label, ensure that the contact surface on the machine is clean and free of dirt, oil and grease so that the label can adhere to properly.

EasyCut B 970

Original operating instructions 150000711_04_us 31

2

2.7

Safety

Information labels on the machine

Location and meaning of the information labels

5

4

Ø17mm min.

14 mm

255 498 1

1

2

3

6

6

6

KMG000-119

1.

Ord. no. 255 499 2 (1x)

Ø17mm

For the "Quick-change blades" version

Check the material thickness of the retaining bolts after each blade change and after each contact with foreign objects. If the material thickness of the retaining bolts is below 14 mm at the weakest point, the retaining bolts must be replaced by authorised specialist personnel.

min.14mm

2.

Ord. no. 255 498 1 (1x)

Ø17mm min. 14 mm

255 498 1

3.

Ord. no. 939 567 1 (1x)

For the "Bolted blades" version

Check the material thickness of the retaining bolts after each blade change and after each contact with foreign objects. If the material thickness of the retaining bolts is below 14 mm at the weakest point, the retaining bolts must be replaced by authorised specialist personnel.

This label indicates the order numbers for spare blades.

139-888

139 888

139-889

139 889

32

EasyCut B 970

Original operating instructions 150000711_04_us

Safety

Information labels on the machine

2

2.7

4.

Ord. no. 27 013 928 0 (1x)

27 013 928 0 The label shows the possible hydraulic connections of the machine. For additional information about connecting the hydraulic hoses

see Page 54

and see Page 43

1+

2+

2-

5.

Ord. no. 939 278 4 (1x)

DE

EN

ES

FR

IT

NL

RU

Vor der Erstinbetriebnahme und 1x jährlich vor der Ernte muss die Reibkupplung gelüftet werden

The friction clutch must be bled at the first operation and once a year before the harvesting season.

El embrague de seguridad debe someterse a una purga antes de la primera puesta en marcha y una vez al año antes de iniciarse la campaña de trabajo.

La sécurité à friction doit faire l'objet d'une purge lors de la première mise en route et une fois par an avant le début de la saison.

La frizione di sicurezza deve essere sottomessa ad uno spurgo alla prima messa in campo come pure una volta all'anno prima della campagna.

Voor de eerste inbedrijfstelling en eenmaal per jaar voor de oogst moet de frictiekoppeling worden belucht.

Перед первым вводом в эксплуатацию и 1 раз в год перед уборкой урожая необходимо растормозить фрикционную муфту.

939 278 4

• Order no. 942 012 2

This label states that the friction clutch must be bled before the initial start-up and once a year before the season.

The lifting points on the machine are marked with this label,

see Page 70 .

942 012 2

• Ord. no. 27 021 260 0

27 021 260 0

There are several lubrication points on the machine which must be lubricated at regular intervals,

see Page 101

. Lubrication points that are not directly visible are additionally marked with this information label.

EasyCut B 970

Original operating instructions 150000711_04_us 33

advertisement

Related manuals

advertisement

Table of contents