Lifting the machine. Krone BA EasyCut B 970

Add to My manuals
110 Pages

advertisement

Lifting the machine. Krone BA EasyCut B 970 | Manualzz

9

9.4

9.4.2

Driving and transport

Preparing the machine for shipment

Lifting the machine

1

942 012 1

2

942 012 1

3

9.4.3

KMG000-108

ü The machine is in the working position.

ü The machine is dismounted from the tractor.

The machine is equipped with 3 suspension points:

• The suspension points (1) and (3) are located at the front on the three-point hitch. The suspension point (2) is located at the rear on the three-point hitch.

„ Ensure that the hoist is mounted correctly on the anchor points.

To lift the machine, ensure that a hoist is used whose minimum lifting capacity depends on the permissible total weight of the machine; see chapter "Technical data",

see Page 40

.

Lashing the machine

WARNING

Danger to life caused by uncontrolled machine movement

If the machine is not properly lashed for transportation by vehicle, the machine may move in an uncontrolled manner and endanger people.

„ Before transporting the machine, secure it properly using suitable lashing material.

Before transporting the machine, secure it in appropriate places using suitable lashing material.

„ Ensure that the machine is lashed in such a way that it cannot move in an uncontrolled manner when transported by vehicle.

70

EasyCut B 970

Original operating instructions 150000711_04_us

advertisement

Related manuals

Download PDF

advertisement

Table of contents