Changing blades for the “blade screw connection” version. Krone BA EasyCut B 970

Add to My manuals
110 Pages

advertisement

Changing blades for the “blade screw connection” version. Krone BA EasyCut B 970 | Manualzz

Maintenance - Cutterbar 14

Check/change blades 14.2

14.2.2

KM000-038

ü

The machine is in the working position, see Page 62 .

ü

The machine has been shut down and secured, see Page 25

.

„

Fold up the front guard, see Page 59

.

WARNING! Risk of injury due to sharp blades! Wear suitable protective gloves.

„ Clean the area around the blades, cutting discs and mower drums.

„ Check wear limit.

ð If the dimension is X>13 mm , the wear limit is not reached.

ð If the dimension X is ≤13 mm or the borehole touches the marking (1), the blade must be replaced.

„

Fold down the front guard, see Page 59

.

Changing blades for the “blade screw connection” version

KM000-044

ü

The machine is in the working position, see Page 62 .

ü

The machine has been shut down and secured, see Page 25

.

„

Fold up the front guard, see Page 59

.

WARNING! Risk of injury due to sharp blades! Wear suitable protective gloves.

„ Clean the area around the blades, cutting discs and mower drums.

„ Remove the damaged or worn blade.

„ Check the fastening parts of the blade. Also replace worn or damaged fastening parts.

EasyCut B 970

Original operating instructions 150000711_04_us 95

advertisement

Related manuals

advertisement

Table of contents