INTRODUCTION. TESA MICRO-HITE, MICRO-HITE 2016, MICRO-HITE+M

Below you will find brief information for MICRO-HITE MH, MICRO-HITE MH+M. This instruction manual provides detailed guidance on the operation, installation, and maintenance of TESA MICRO-HITE height gauges. It covers topics such as general description, technical specifications, installation procedures, control panel functionalities, measurement interfaces, system options, measurement principles, and data management. You'll discover how to determine probe constants, use different measurement modes, and utilize the calculator, perpendicularity, and 2D modes for accurate measurements.

PDF

Document

1 INTRODUCTION

1.1 Acknowledgements

1.2 Warning

1.3 Copyright

(document)

1.4 Copyright

(software)

1.5 Preamble

Dear user,

We would like to thank you for having chosen TESA as your metrology partner. We thank you for your confidence in purchasing one of our high-end height gauges of our MICRO-HITE or MICRO-

HITE+M range.

Your metrological concerns are important to us and we are convinced that this instrument will meet your expectations. We are constantly striving to develop solutions adjusted to your needs.

The result? Your satisfaction for many years. Our pleasure? To know that our products help you meet your needs in research, development and production in a quick and efficient way, and for a long time.

The whole TESA team welcomes you to our family of TESA product users.

Your TESA team

This instruction manual must be read by every technician or operator before the installation, maintenance or use of the instrument. Not adhering to certain instructions regarding its use could lead to malfunction or deterioration of the instrument.

The content of this document has been created subject to subsequent modifications without prior notice. All modification rights are reserved.

The French version is the reference language. All other language versions are only translations.

The software delivered with MICRO-HITE or MICRO-HITE+M contains copyright-protected software that is licensed under the following open source licenses:

•

MIT: https://opensource.org/licenses/MIT

•

CDDL: https://opensource.org/licenses/cddl1.php

•

CPOL: http://www.codeproject.com/info/cpol10.aspx

•

LGPLv2: https://opensource.org/licenses/LGPL-2.1

For more information, please contact your local representative.

The MICRO-HITE or MICRO-HITE+M is the result of more than 70 years of experience in the conception and production of high-precision measurement equipment. It has been designed to meet the needs of a production environment and to offer its users an affordable, quick and precise way for dimensional control of small or large workpieces in workshops or laboratories.

This document describes the different procedures to be followed in order to allow for a quick and easy handling of both our manual range MICRO-HITE 2016 and our motorised range MICRO-

HITE+M 2016.

V15 – 03.10.2017 7