Priming Mode. Balboa Water Group Revolution 100 Pages
Priming Mode. Balboa Water Group Revolution
Balboa Water Group Revolution is a sophisticated spa control system that offers a wide range of features and capabilities to enhance your spa experience. With its advanced technology, the Revolution system allows you to effortlessly control various aspects of your spa, including temperature, filtration, lighting, and more. Whether you're looking to create a relaxing ambiance or maintain optimal water conditions, the Revolution system provides the ultimate convenience and control.
advertisement
Priming Mode
Press to Start Pump 1 at Low Speed
Press Again to Switch to High Speed
Press to Start Pump 2
Transforming the Control of Hot Tubs
Revolution
Priming Mode
t t t t
Press the JETS button once to start Pump 1 in low speed
Press again to switch to high speed
Press the AUX button to turn on Pump 2, if available. Be sure that the 2nd pump is energized.
The pumps will now be running at high speed to assist priming.
!
IMPORTANT
A pump should not be allowed to run without priming for more than 2 minutes.
Under NO circumstances should a pump be allowed to run without priming beyond the end of the 4 - 5 minute priming mode. Doing so may cause damage to the pump and cause the system to energize the heater and go into an overheat condition.
25
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
advertisement
Key Features
- Effortlessly control spa temperature, filtration, and lighting
- Monitor and adjust settings from a user-friendly interface
- Compatible with a variety of spa equipment and accessories
- Advanced safety features ensure peace of mind
- Easy to install and maintain