Configuration Setup. Balboa Water Group Revolution

Configuration Setup. Balboa Water Group Revolution

Add to My manuals
100 Pages

Balboa Water Group Revolution is a sophisticated spa control system that offers a wide range of features and capabilities to enhance your spa experience. With its advanced technology, the Revolution system allows you to effortlessly control various aspects of your spa, including temperature, filtration, lighting, and more. Whether you're looking to create a relaxing ambiance or maintain optimal water conditions, the Revolution system provides the ultimate convenience and control.

advertisement

Configuration Setup. Balboa Water Group Revolution | Manualzz

ON POSITION

MEMORY RESET*

SPECIAL AMPERAGE RULE ON

ADD 4 HS PUMPS WITH HEAT

ADD 2 HS PUMPS WITH HEAT

ADD 1 HS PUMP WITH HEAT

TEST MODE ON

*SWITCH # 6 SHOULD BE SET TO OFF

UPON FINAL INSTALLATION.

S1 SWITCH #

4

3

6

5

2

1

OFF POSITION

STORE SETTINGS*

SPECIAL AMPERAGE RULE OFF

DON’T ADD 4 HS PUMPS W/HTR

DON’T ADD 2 HS PUMPS W/HTR

DON’T ADD 1 HS PUMP W/HTR

TEST MODE OFF

ALL UNUSED SWITCHES

SHOULD BE OFF

22117_B WHT AC

N

GND

K5

K6

WHITE RED AC

SENSOR A

SENSOR B

4.0 kW

J57

BLACK

L1

L2 J49

J45

HTR A

J46

GND

J20

J56

GND

RED

GRN

HTR B

J44

J48

F6 0.1A 250V

UNFUSED

J1

J2

K3

F5 30A

K1

K2

F3 10A 250V

K4

J12 J8 J14

F2 3A 250V

J22 J21

CONTROL PANEL

TO J33

AUX

TO J5

22121_C

J28 AUX FRZ

J29 VAC

J17 6

J16

1

S1

J22

J27

H3

J30 TST

J5

J31 HCE

J26 H2

J25 H1

J45

J15

LIGHT

J33

T1

J46

K7

J24

F4 1A 250V

Setup 3 & 4

Move jumper wire connector J12 to J13.

Power Board Setup Chart

Setup

No.

3

4

Pump 1 (P1)

J8

2 SPD

1 SPD

Pump 2 (P2)

J14

NA

NA

Blower

J14

YES

YES

Circ Pump

J21

NA

YES

Ozone

J22

240V

240V

Jumper 15

Connects To

J13

J13

Transforming the Control of Hot Tubs

Revolution

Configuration Setup 3 & 4

240 V

OLT

C

ONFIGURATION WITH

B

LOWER

NOTE: The top logic board must be removed to gain access to the connections on the power board.

If the board configuration is changed, the software setup must be changed.

This is accomplished in the SETP menu under UTIL.

Power Board:

Wiring changes: Move J12 to J13

Voltage: 240V, 60Hz

Heater: 4.0 KW @ 240 VAC 6

Logic Board:

S1 DIP switch No. 2: ON

LED Spa Light (J15): 12 VAC 1.0 A Max.

S1

1

60

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,

834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

advertisement

Key Features

  • Effortlessly control spa temperature, filtration, and lighting
  • Monitor and adjust settings from a user-friendly interface
  • Compatible with a variety of spa equipment and accessories
  • Advanced safety features ensure peace of mind
  • Easy to install and maintain

Frequently Answers and Questions

Is the Revolution system compatible with my existing spa equipment?
Yes, the Revolution system is designed to be compatible with a wide range of spa equipment and accessories.
Can I control the system remotely?
The Revolution system does not offer remote control capabilities.
How do I troubleshoot common issues with the Revolution system?
Refer to the included troubleshooting guide for assistance with common issues.

Related manuals

Download PDF

advertisement

Table of contents