PC Users. Smartdisk Firewire CD-R/W

Add to My manuals
29 Pages

advertisement

PC Users. Smartdisk Firewire CD-R/W | Manualzz

PC Users

PC Users

To connect SmartDisk FireWire CD-R/W to your PC:

1

Connect one end of the FireWire cable to the FireWire port on your computer.

FireWire Ports

FireWire Cable

2

Connect the other end to a FireWire port on SmartDisk FireWire CD-R/W.

The SmartDisk FireWire CD-R/W icon appears in

My Computer

and in

Windows Explorer

as described below.

Caution

Do not force the connection as damage may occur to the connector or the FireWire port.

Drive Letter Assigned

After you connect SmartDisk FireWire CD-R/W to your PC, the CD-R/W drive is assigned the next available drive letter in

Windows Explorer

or

My Computer

. For example, if your hard drive is assigned the letter C: and a removable disk drive is currently installed on your computer using the letter D:, then the letter E: is assigned to the SmartDisk FireWire CD-R/W.

Congratulations! You can now use SmartDisk FireWire CD-R/W to read and write

CDs.

Note

If the SmartDisk FireWire CD-R/W does not appear in My Computer and the computer is connected to a network, change your mapped network letters to start at a higher letter. If you are unsure on how to do this, ask your System Administrator for assistance.

SmartDisk FireWire CD-R/W User Guide

16

advertisement

Related manuals