Intended use. ABB 6256/1-WL HA-S-1-WL, HA-S-1-WL, HA-S-2-WL 38 Pages
Intended use. ABB 6256/1-WL HA-S-1-WL, HA-S-1-WL, HA-S-2-WL
advertisement
Safety
The radiator thermostats Basic and Comfort can be used to create a convenient single room control by operating the radiator heating via wireless signal. The radiator thermostats are fully compatible with radiator valves with an M30 x1.5 thread. For other valves (e.g. Danfoss), one of the supplied adapters must be used.
Only AA alkaline batteries are permitted for use. The scope of delivery includes 2 batteries.
The device is intended for the following:
■
Operation according to the listed technical data
■
Installation in dry interior rooms
The intended use also includes adherence to all specifications in this manual.
Declaration of conformity
Busch-Jaeger | ABB, herewith declare that radio system types HA-S-1-WL and HA-S-2-WL conform to directive 2014/53EU.
The complete text of the EU declaration of conformity is available at the following Internet address:
HA-S-1-WL www.busch-jaeger-catalogue.com/6200-0-0133,artikel.html
HA-S-2-WL www.busch-jaeger-catalogue.com/6200-0-0134,artikel.html
Tab.1: Link to Declaration of conformity
2.4
Each use not listed in Chapter 2.2 “Intended use“ on page 5 is deemed improper use and can lead to personal injury and damage to property.
ABB is not liable for damages caused by use deemed contrary to the intended use of the device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
■
Unauthorized
■
Repairs
■ use
■
The use in bathroom areas
Target group / Qualifications of personnel
No special qualifications are needed to connect and operate the device.
However, persons installing or connecting and operating the device must have read and understood the manual and follow the instructions provided.
Product manual 2CKA001473B9364 │ 5
advertisement
Related manuals
advertisement
Table of contents
- 3 Information on the manual
- 4 Safety
- 4 Information and symbols used
- 5 Intended use
- 5 Improper use
- 5 Target group / Qualifications of personnel
- 6 Safety instructions
- 6 Use of batteries
- 6 Environment
- 7 Setup and function
- 8 Scope of supply
- 8 Additional necessary components
- 9 Overview of types
- 9 Functions
- 11 Device overview
- 12 Technical data
- 13 Dimensional drawings
- 14 Connection and installation
- 14 Installation
- 17 Dismantling
- 18 Commissioning
- 18 Coupling of wireless devices with the System Access Point
- 20 Allocation of devices and definition of channels
- 25 Setting options per channel
- 28 Links
- 29 Update
- 30 Operation
- 30 Setpoint adjustment or change of mode
- 32 Special features during operation
- 34 Displays / messages
- 35 Maintenance
- 35 Cleaning
- 36 Notes
- 37 Index